Chrysler neon 1997 Service Manual page 1613

OUTSIDE DOOR HAN- DLE LOCK CYLINDER DOOR
23 - 28 BODY
REMOVAL AND INSTALLATION (Continued)
Fig. 29 Door Lock Cylinder
FRONT DOOR CHECK STOP
REMOVAL
(1) Remove door trim panel and water shield.
(2) Remove bolt holding check stop to hinge pillar.
(3) Remove door speaker.
(4) Remove bolts holding check stop to door end
frame (Fig. 30).
(5) Separate check stop from vehicle.
Fig. 30 Front Door Check Stop
INSTALLATION
(1) Position door check on vehicle and install bolts
attaching stop to door end frame.
(2) Install door speaker, if so equipped.
(3) Install bolt holding door check stop to hinge
pillar.
(4) Install door trim panel and water shield.
CHECK STOP RETAINER STANCHION
SIDE VIEW MIRROR TRIM COVER
REMOVAL
(1) Disengage clips holding side view mirror cover
to stanchion (Fig. 31).
(2) Separate mirror cover from vehicle.
Fig. 31 Side View Mirror Trim Cover
INSTALLATION
Reverse the preceding operation.
SIDE VIEW MIRROR
REMOVAL
(1) Remove side view mirror cover.
(2) Remove door trim panel.
(3) Remove water shield if equipped with power
mirror.
(4) Disengage wire connector from power mirror
motor, if equipped.
(5) Remove bolts holding mirror to stanchion (Fig.
32).
(6) Separate mirror from vehicle.
INSTALLATION
(1) Position side view mirror on vehicle and install
nuts attaching mirror to stanchion.
(2) Engage wire connector from power window
motor, if so equipped.
(3) Install water shield if equipped with power
mirror.
(4) Install door trim panel.
(5) Install side view mirror trim cover.
MIRROR COVER TRIM CLIPS
PL