Chrysler neon 1997 Service Manual page 1629

23 - 44 BODY
TRUNK WEATHER- STRIP
REMOVAL AND INSTALLATION (Continued)
INSTALLATION
Reverse the preceding operation.
TRUNK WEATHERSTRIP
REMOVAL
(1) Release trunk lid latch and open trunk lid.
(2) Pull trunk lid weatherstrip form trunk opening
fence (Fig. 74).
(3) Separate weatherstrip from vehicle.
Fig. 74 Trunk Weatherstrip
INSTALLATION
Reverse the preceding operation.
TRUNK LATCH STRIKER
REMOVAL
(1) Release trunk lid latch and open trunk lid.
(2) Remove push-in fasteners holding trunk lining
to tail panel.
(3) Separate trunk lining from tail panel.
(4) Remove bolts holding trunk latch striker to tail
panel (Fig. 75).
(5) Separate striker from vehicle.
INSTALLATION
Reverse the preceding operation.
TRUNK LATCH
REMOVAL
(1) Release trunk lid latch and open trunk lid.
(2) Remove bolts holding trunk latch to trunk lid
(Fig. 76).
(3) Separate trunk latch from trunk lid.
(4) Disconnect remote trunk latch release cable
form trunk latch.
(5) Disengage trunk ajar switch connector from
latch.
(6) Separate latch from vehicle.
TRUNK
TRUNK OPENING FENCE
INSTALLATION
switch connector to latch.
trunk latch.
TRUNK LOCK CYLINDER
REMOVAL
trunk lid.
INSTALLATION
LATCH LOCK CYLINDER LINK
Fig. 75 Trunk Latch Striker
Fig. 76 Trunk Latch
(1) Position latch in vehicle and engage trunk ajar
(2) Connect remote trunk latch release cable to
(3) Install bolts holding trunk latch to trunk lid.
(1) Remove trunk latch.
(2) Remove clip holding trunk lock cylinder to
(3) Pull lock cylinder from trunk lid (Fig. 77).
Reverse the preceding operation.
PL
MOUNTED CENTER LAMP STOP HIGH