Page 1 Town & Countr y 2 0 0 8 O W N E R ’ S M A N U A L...
Page 2 With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc. used in substitution therefor.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
Page 5 INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION HOW TO USE THIS MANUAL This Owner’s Manual has been prepared with the assis- Consult the Table of Contents to determine which section tance of service and engineering specialists to acquaint contains the information you desire. you with the operation and maintenance of your vehicle. The detailed Index at the back of this manual contains a It is supplemented by a Warranty Information Booklet complete listing of all subjects.
Page 7 INTRODUCTION 5...
Page 8: Warnings And Cautions
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures that could result in an accident or bodily injury. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire manual you may miss important infor- mation.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 11: Table Of Contents
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....12 Remote Starting System — If Equipped ..27 Wireless Ignition Node (WIN) .
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sliding Side Door ......41 Automatic Locking Retractors (ALR) Mode – If Equipped .
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 Rear Seat Delete Feature Safety Tips ......93 (Commercial Vehicles Only) —...
Page 14: Things To Know Before Starting Your Vehicle 9
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses a keyless ignition system. This system consists of a Remote Keyless Entry (RKE) transmitter with integrated ignition Key and a Wireless Ignition Node (WIN) with integral ignition switch. You can insert the double-sided key into the ignition switch with either side up.
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Integrated Ignition Key The integrated ignition key operates the ignition switch. It also contains the Remote Keyless Entry (RKE) trans- mitter and a valet key, which stores in the rear of the transmitter.
Page 16 14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Tip Start Feature WARNING! 1. Do not press the accelerator pedal during this process. NEVER leave children alone in a vehicle. Leaving 2. Insert the integrated ignition key into the ignition unattended children in a vehicle is dangerous for a switch.
Page 17: Sentry Key Immobilizer System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 Key-In-Ignition Reminder the vehicle. The system will not allow the engine to crank If you open the driver’s door with the integrated ignition if an invalid RKE transmitter is used to operate the key in the ignition, a chime will sound to remind you to ignition switch.
Page 18: Replacement Keys
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Replacement Keys • The Sentry Key Immobilizer system is not compatible NOTE: Only RKE transmitters that are programmed to with aftermarket remote starting systems. Use of these the vehicle electronics can be used to start and operate systems may result in vehicle starting problems and the vehicle.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 programming a blank transmitter to the vehicle electron- After 10 seconds, a chime will sound and the Vehicle ics. A blank transmitter is one that has never been Security Light will begin to flash. Turn the ignition switch programmed.
Page 20: Security Alarm System - If Equipped
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If a programmed key is lost, see your authorized SECURITY ALARM SYSTEM — IF EQUIPPED dealer to have all remaining keys erased from the sys- The Vehicle Security Alarm system monitors the vehicle tem’s memory.
Page 21 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Arming The System Disarm The System Remove the key from the ignition switch and either press Either press the UNLOCK button on the RKE transmitter a power door lock switch while the driver or passenger or insert a valid ignition key into the ignition switch and door is open or press the LOCK button on the Remote turn the key to the ON position.
Page 22: Illuminated Entry System - If Equipped
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE previously described arming sequences has occurred, the ILLUMINATED ENTRY SYSTEM — IF EQUIPPED system will arm regardless of whether you are in the The courtesy lights will turn on when you use the vehicle or not.
Page 23: Remote Keyless Entry (Rke) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 REMOTE KEYLESS ENTRY (RKE) — IF Using The RKE Transmitter EQUIPPED Three-button transmitters will provide basic UNLOCK, This system allows you to lock or unlock the doors and LOCK and PANIC functions. liftgate, and activate the PANIC alarm, optional power liftgate, left power sliding door, and right power sliding door from distances up to about 23 ft (7 m) using a...
Page 24 22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE liftgate, left power sliding door, or right power sliding To UNLOCK Doors And Liftgate door. Other options of the system allow you to turn Press and release the UNLOCK button on the RKE ON/OFF the Sound Horn with Remote Lock and Flash transmitter once to unlock the driver’s door or twice to Lights with Remote Key LOCK features.
Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 • For vehicles not equipped with the EVIC, the Remote Sound Horn With Remote Key Lock UNLOCK feature can be enabled or disabled by per- This feature will cause the horn to chirp when the doors forming the following procedure: are locked with the RKE transmitter.
Page 26 24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Using The PANIC Alarm If the button is pushed while the liftgate is being power To turn the PANIC Alarm feature ON or OFF, press and closed, the liftgate will reverse to the full open position. hold the PANIC button on the RKE transmitter for at If the liftgate is locked and is not equipped with a least one second and release.
Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Open/Close Power Right Power Sliding Door — If 3. While the UNLOCK button on the RKE transmitter is Equipped pressed, (after five seconds) press the LOCK button. Press the Right Power Sliding Door button twice on the Release both buttons.
Page 28 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Programming Additional RKE Transmitters Refer to Sentry Key Immobilizer System “Customer Key Programming.” If you do not have a programmed RKE transmitter, contact your authorized dealer for details. Replacing the RKE Transmitter Battery The recommended replacement battery is one CR2032 battery.
Page 29: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 General Information REMOTE STARTING SYSTEM — IF EQUIPPED This device complies with part 15 of the FCC rules and Remote Starting conveniently starts the engine from RSS 210 of Industry Canada. Operation is subject to the outside the vehicle by using the Remote Keyless Entry following conditions: (RKE) transmitter while maintaining the Security Alarm...
Page 30: To Enter Remote Start Mode
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE How To Use Remote Start To Enter Remote Start Mode All of the following conditions must be met before the engine will Remote Start: • Gear shift lever in PARK • Doors closed •...
Page 31: Exit Remote Start Mode/Drive Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 honk twice (if programmed). Then, the engine will start To Enter the Vehicle After Remote Start and the vehicle will remain in the Remote Start mode for To enter the vehicle while the engine is running during a a 15 minute cycle.
Page 32: Cancel Remote Start
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle To Turn Off the Engine While in Remote Start Information Center (EVIC), the message “Insert Key/ Mode Turn To Run” will flash in the EVIC until you insert Press and release the Remote Start button one time.
Page 33: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 DOOR LOCKS If the lock plunger is down when you shut the door, the door will lock. Therefore, make sure the keys are not MANUAL DOOR LOCKS inside the vehicle before closing the door. Lock the doors by pushing down on the lock plungers on each door trim panel.
Page 34: Power Door Locks - If Equipped
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key and from the ignition lock, and lock your vehicle.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 chime will sound if the key is in the ignition switch and Lock Doors Automatically — If Equipped a door is open, as a reminder to remove the key. If the Lock Doors Automatically feature is enabled, your door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h).
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Place the key into the ignition. The Lock Doors Automatically at 15 mph (24 km/h) feature can be reactivated by repeating the above men- 4. Within 15 seconds cycle the ignition key from the OFF tioned procedure or by performing the procedure in the position to the ON/RUN position a minimum of four EVIC, Customer Programmable Features section on ve-...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 The Unlock Doors Automatically On Exit feature can be 6. A single chime will sound to indicate the feature has enabled or disabled by performing the following proce- been changed. dure: 7. To reactivate this feature, repeat the above steps. 1.
Page 38: Windows
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WINDOWS POWER WINDOWS You can control all windows using switches on the POWER VENT WINDOWS — IF EQUIPPED driver’s door trim panel. The switches will operate only Switches on the driver’s door trim panel let the driver when the ignition switch is in the ON or ACC position operate the two vent windows from the driver’s seat.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Driver’s Master Power Window Switches Power Window Lockout Switch — If Equipped The driver may lock out all power windows by depress- ing the bar switch just below the power window switches. Driver’s Power Window Switches 1 - Left Rear 3 - Left Front...
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE and locks and unlocks all doors. The switch will operate Sliding Side Door Power Window Switch only when the ignition switch is in the ON or ACC There is a single switch on each sliding side door which position and during power accessory delay.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: The sliding door windows do not fully open, Auto Up Feature With Anti–Pinch Protection — If stopping several inches above the window sill. Equipped The left front window switch may be equipped with an Auto Down Feature —...
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Any impact due to rough road conditions may trigger 2. Push the window switch down firmly to the second the auto reverse function unexpectedly during auto- detent to open the window completely and continue to close.
Page 43: Things To Know Before Starting Your Vehicle 41
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 SLIDING SIDE DOOR door after the hold-open latch is activated, you must The sliding door may be opened from the inside or the rock the inside handle forward or pull outward on the outside.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There are also power sliding side door switches located on the trim panel just in front of the power sliding door for the rear seat passengers. Pressing the switch once will open the power sliding door. When the door is fully open pressing the switch a second time will close the door.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • If the power sliding side door is not in the full open or If the inside or outside door handles are used while the power sliding side door is activated, the power sliding close position, it will fully open when a power sliding door feature will be canceled and the door must be door switch is pressed.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Sliding Side Door Open Flash Power Sliding Side Door Master Lock Switch The left and right exterior hazard lights will flash for 12 The power sliding side doors may also be opened by seconds when either sliding door is opened.
Page 47: Sliding Side Door Child Protection Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a child protection door lock system. NOTE: When the child lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Engage The Child Protection Door Lock NOTE: • After engaging the Child Protection Door Lock, al- 1. Open the sliding side door. ways test the door from the inside to make certain it is 2.
Page 49: Liftgate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 To Disengage The Child Protection Door Lock WARNING! 1. Open the sliding side door. Avoid trapping anyone in the vehicle in a collision. 2. Slide the child lock control outward (away from the Remember that the sliding doors can only be opened vehicle) to disengage the Child Protection Door Lock.
Page 50: Power Liftgate - If Equipped
48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the liftgate, depress the liftgate release handle If the liftgate is locked and is not equipped with the located on the underside of the license plate bar and pull power liftgate feature, pressing the button on the RKE the liftgate open with one fluid motion.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 The power liftgate may also be opened and closed by The power liftgate may be closed by pressing the button, pressing the button located on the front overhead con- located in the upper left trim in the liftgate opening. sole.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The power liftgate must be in the full open or close WARNING! positions for any of the buttons to operate. If the liftgate is not in the full open or close positions, it must During power operation, personal injury or cargo be opened or closed manually.
Page 53: Storage Bin Safety Warning
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 • If the power liftgate encounters multiple obstructions Gas props support the liftgate in the open position. within the same cycle, the system will automatically However, because the gas pressure drops with tempera- stop and must be opened or closed manually.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! CAUTION! In an accident, serious injury could result if the seat The storage bin cover must be flat and locked to storage bin covers are not properly latched. avoid damage from contact with the front seat tracks, which have minimal clearance to the cover.
Page 55: Storage Bin Cover Emergency Release Strap - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Storage Bin Cover Emergency Release Strap — If Equipped As a security measure, your vehicle may be built with a Storage Bin Cover Emergency Release strap built into the storage bin cover latching mechanism. Storage Bin Cover Emergency Release Lever NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from...
Page 56: Reinstalling Storage Bin Cover Emergency Release Strap
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark strap attached to the storage bin cover latching mechanism. Reinstalling Storage Bin Cover Emergency Release Strap If the storage bin cover strap disengages from the latch, it...
Page 57: Occupant Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 • All seat belt systems (except the driver’s, Swivel n’ Go, OCCUPANT RESTRAINTS Some of the most important safety features in your and third row center position) include Automatic vehicle are the restraint systems: Locking Retractors (ALRs), which lock the seat belt webbing into position by extending the belt all the •...
Page 58: Lap/Shoulder Belts
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the WARNING! inside of the vehicle. Everyone in a motor vehicle should be belted at all times. In a collision, you and your passengers can suffer much greater injuries if you are not properly buckled Lap/Shoulder Belts up.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 WARNING! WARNING! • Wearing a seat belt incorrectly is dangerous. Seat It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people belts are designed to go around the large bones of riding in these areas are more likely to be seriously your body.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! Two people should never be belted into a single seat belt. People belted together can crash into one an- other in a collision, hurting one another badly. Never use a lap/shoulder belt or lap belt for more than one person, no matter what their size.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click”. A belt that is worn under your arm is very dangerous. Your body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • A belt that is buckled into the wrong buckle will not protect you properly. The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 6. To release the belt, push the red button on the buckle. WARNING! The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to •...
Page 64: Automatic Locking Retractors (Alr) Mode - If Equipped
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Pull the strap down and secure the small latch plate of pushing anywhere on the anchorage. To move the an- the lap belt into the small buckle until you hear a “click”. chorage downward, squeeze the actuation buttons while simultaneously pushing down on the anchorage assem- Position the shoulder belt on your chest so that it is...
Page 65: Seat Belt Pretensioners
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 When To Use The Automatic Locking Mode Seat Belt Pretensioners Use The Automatic Locking Mode anytime a child safety The seat belts for both front seating positions are seat is installed in a passenger seating position. Children equipped with pretensioning devices that are designed to 12 years old and younger should be properly restrained remove slack from the seat belt in the event of a collision.
Page 66: Enhanced Seat Belt Use Reminder System (Beltalert )
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Seat Belt Use Reminder System NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON (BeltAlert ) If the occupied driver’s seat belt has not been buckled or START position.
Page 67: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 4. Turn the ignition switch to the OFF position. A single Seat Belt Extender chime will sound to signify that you have successfully If a seat belt is too short, even when fully extended and completed the programming.
Page 68: Supplemental Restraint System (Srs) - Airbag
66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Restraint System (SRS) - Airbag window. If the vehicle is equipped with SABIC air bags, This vehicle has airbags for both the driver and front they are located above the side windows and their covers passenger as a supplement to the seat belt restraint are also labeled: SRS AIRBAG.
Page 69: Front Seat Airbag Features
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Seat Belt Reminder Light The first stage inflator is triggered immediately during an impact that requires airbag deployment. The timing of • Knee Impact Bolster the second stage determines whether the output force is •...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front Passenger Airbag Special Features A new active venting front passenger airbag is designed to reduce the risk of occupants who may be out of position by the use of active vents positioned on each side of the airbag.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Supplemental Side Airbag Inflatable Curtain WARNING! (SABIC) — If Equipped SABIC Airbags offer side-impact and vehicle rollover • Do not put anything on or around the airbag protection to front and rear seat outboard occupants in covers or attempt to open them manually.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE moderate to severe side collisions. In certain types of WARNING! collisions, both the front and side airbags may be trig- gered. However, even in collisions where the airbags If your vehicle is equipped with left and right Side work, you need the seat belts to keep you in the right Airbag Inflatable Curtain (SABIC), do not stack position for the airbags to protect you properly.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 child restraints or belt-positioning booster seats should 4. If your vehicle has side airbags, do not lean against ride properly buckled up in the rear seat. Never allow the door, airbags will inflate forcefully into the space children to slide the shoulder belt behind them or under between you and the door.
Page 74: Airbag Deployment Sensors And Controls
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE impact sensors signals, a central electronic ORC deploys WARNING! the front airbags, side inflatable airbag curtains, side seat thorax airbags, and front seat belt pretensioners as re- • Being too close to the steering wheel or instrument quired for each type of impact.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 the AIRBAG warning light will turn off. If the ORC Front and Side Impact Sensors detects a malfunction in any part of the system, it turns Impact Sensors trigger airbag deployment in front and on the AIRBAG warning light, either momentarily or side impacts, and aid the ORC in determining appropri- continuously.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Turns on the interior lights, which remain on as long as Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped the battery has power or until the ignition key is The ORC deploys the SABIC during collision with other removed.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 If you do have a collision which deploys the airbags, any irritation, move to fresh air. If the irritation continues, or all of the following may occur: see your doctor. If these particles settle on your clothing, follow the garment manufacturer’s instruc- •...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! WARNING! Do not attempt to modify any part of your advanced airbag system. The airbag may inflate accidentally or • Modifications to any part of the airbag system may not function properly if modifications are made.
Page 79: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Airbag Light located on the inside of the fuse block cover for the You will want to have the airbags ready to proper airbag fuses. See your authorized dealer if the inflate for your protection in a collision. While fuse is good.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Under certain circumstances, EDR data may not be accessing the electronic data stored, unless ordered to recorded (e.g., loss of battery power). download data by a court with legal jurisdiction (i.e., pursuant to a warrant).
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 • Impact acceleration and angle 3. Requested by police under a legal warrant. • Seat belt status 4. Otherwise required by law. • Brake status (service and parking brakes) Data Parameters That May Be Recorded: •...
Page 82: Integrated Child Seat - If Equipped
80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Integrated Child Seat — If Equipped To obtain Integrated Child Seat replacement instruc- Operating instructions for the second row bench seat tions: Refer to Publication Order Forms at the back of this with Integrated Child Seat are included with the seat.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 • Safety experts recommend that children ride WARNING! rearward-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). Two types In a collision, an unrestrained child, even a tiny baby, of child restraints can be used rearward-facing: infant can become a missile inside the vehicle.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Rearward-facing child seats must NEVER be used in Older Children and Child Restraints the front seat of a vehicle with a front passenger Children who weigh more than 20 lbs (9 kg) and who are airbag.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 • Check belt fit periodically. A child’s squirming or shoulder belt. (Some booster seats are equipped with a front shield and are held in the vehicle by the lap slouching can move the belt out of position. portion.) •...
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some tips on getting the most out of your child WARNING! restraint: • Improper installation can lead to failure of an • Before buying any restraint system, make sure that it infant or child restraint.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 • The passenger seat belts are equipped with cinching around, and insert the latch plate into the buckle latch plates, which are designed to keep the lap portion again. If you still can’t make the child restraint secure, tight around the child restraint so that it is not neces- try a different seating position.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE located in the rear surface of the seatback. In addition, all third row fold-in-floor seats are equipped with a child restraint tether anchor at the center seating position. Rear Seat Tether Strap Mounting When using the tether anchorages in the center position on third row fold-in-floor seating, ensure that the strap is routed underneath the top of the seatback and the head...
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Because the lower anchorages are to be introduced to WARNING! passenger carrying vehicles over a period of years, child restraint systems having attachments for those anchor- An incorrectly anchored tether strap could lead to ages will continue to have features for installation in increased head motion and possible injury to the vehicles using the lap or lap/shoulder belt.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Remind all children in the vehicle that the seat belts are Not all child restraint systems will be installed as we not toys and should not be played with, and never leave have described here.
Page 91: Rear Seat Delete Feature (Commercial Vehicles Only) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Pets should be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts. REAR SEAT DELETE FEATURE (COMMERCIAL VEHICLES ONLY) — IF EQUIPPED Commercial cargo vehicles are not designed for use as a family vehicle and are not intended for carrying children in the front passenger seat.
Page 92: Restraining Infants And Small Children With Seat Delete Feature (Commercial Vehicles Only)
90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE VEHICLE EQUIPPED WITH THE REAR SEAT DE- WARNING! LETE FEATURE (Commercial Vehicles Only). Rearward-facing infant restraints must never be se- • The forward-facing child seat is for children from cured in the passenger seat of a vehicle with a about 20 to 40 lbs (9 to 18 kg), and more than one year passenger airbag.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 • Children more than 40 lbs (18 kg) should be secured in 3. Route the tether strap under the head rest. the passenger seat in a child restraint or belt- NOTE: Ensure that the child restraint tether strap is positioning booster seat with the seat adjusted to the centered between the headrest supports underneath the rear most position.
Page 94: Engine Break-In Recommendations
92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine in your vehicle. The vehicle tether anchor is designed to be used with a child restraint only. It should not be used for any Drive moderately during the first 300 mi (500 km).
Page 95: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 A new engine may consume some oil during its first few Airbag Light thousand miles (kilometers) of operation. This should be The light should come on and remain on for four seconds considered as a normal part of the break-in and not as a bulb check when the ignition switch is first turned interpreted as an indication of difficulty.
Page 96: Periodic Safety Checks You Should Make Outside The Vehicle
94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE PERIODIC SAFETY CHECKS YOU SHOULD MAKE Exhaust Gas OUTSIDE THE VEHICLE WARNING! Tires Examine tires for excessive tread wear or uneven wear Exhaust gases can injure or kill. They contain carbon patterns. Check for stones, nails, glass, or other objects monoxide (CO) which is colorless and odorless.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 WARNING! If you are required to drive with the deck lid / liftgate open, make sure that all windows are closed, and the climate control blower switch is set at high speed. DO NOT use the recirculation mode.
Page 99 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......100 Advanced Phone Connectivity ... . 120 Manual Rear View Day/Night Mirror —...
Page 100 98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Driver Memory Seat — If Equipped ..153 Adjustable Pedals — If Equipped ... 175 Setting Memory Positions And Linking RKE Electronic Speed Control —...
Page 101 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 Electrical Power Outlets — If Equipped ..193 Door Trim Panel Storage ....207 Power Inverter —...
Page 102: Mirrors
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Annoying headlight glare can be reduced by moving the small control under the mirror to the night position Manual Rear View Day/Night Mirror — If Equipped (toward rear of vehicle). The mirror should be adjusted Adjust the mirror to center on the view through the rear while set in the day position (toward windshield).
Page 103: Exterior Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Illuminated Vanity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor down and swing the mirror cover upward. The lights turn on automatically. Closing the mirror cover turns off the lights.
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Side View Manual Folding Mirrors Tilt In Reverse Feature Driver’s Side View Mirror All exterior mirrors are hinged and may be moved either — If Equipped forward or rearward to resist damage. The hinges have The Tilt in Reverse feature tilts the driver’s outside three detent positions;...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 mirrors. Press the switch to the Left or Right for mirror selection. Press the mirror select switch again to guard against accidentally moving a mirror position. The mirror selection will also automatically turn off after 30 seconds. Power Folding Mirror Switch Both mirrors will always move together and will fold anytime the button is pressed.
Page 106: Hands-Free Communication (Uconnect ) - If Equipped
NOTE: The sales code RER, REN and REU radios following websites: contain an integrated Hands-Free Communication • www.chrysler.com/uconnect (UConnect ) system. Refer to your “Navigation User’s Manual” for UConnect system operating instructions • www.dodge.com/uconnect for these radios.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 UConnect allows you to transfer calls between the one linked (or paired) cellular phone can be used with the system and your cellular phone as you enter or exit your system at a time. The system is available in English, vehicle and enables you to mute the system’s microphone Spanish, or French languages.
Page 108: Operation
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The UConnect system can be used with any Hands-Free Operation Profile certified Bluetooth cellular phone. See the Voice commands can be used to operate the UConnect UConnect website for supported phones. If your cellu- system and to navigate through the UConnect menu lar phone supports a different profile (e.g., Headset structure.
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 example, you can use the combined form voice com- Cancel Command mand Phonebook New Entry, or you can break the At any prompt, after the beep, you can say Cancel and combined form command into two voice commands: you will be returned to the main menu.
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, after the beep, say Pair a Phone and use if multiple cellular phones are in the vehicle at the follow the audible prompts. same time. For example, if priority 3 and priority 5 phones are present in the vehicle, the UConnect •...
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 user from dialing an invalid combination of numbers. you can say John Doe, where John Doe is a previ- For example, in the U.S., 234-567-890 is nine digits ously stored name entry in the UConnect phonebook. long, which is not a valid U.S.
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say the name of the new entry. Use of four associated phone numbers and designations. Each long names helps the voice recognition and it is language has a separate 32-name phonebook accessible recommended.
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 • Some phones cannot send phonebook entries if they • You will then be asked for the name of the phonebook are already connected to any system via Bluetooth , entry that you wish to edit. and you may see a message on the phone display that •...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the UConnect system will Delete Entries in the UConnect Phonebook ask you which designation you wish to delete: home, NOTE: Editing phonebook entries is recommended work, mobile, pager, or all. Say the designation you when the vehicle is not in motion.
Page 115: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 List All Names in the UConnect Phonebook Phone Call Features The following features can be accessed through the • Press the PHONE button to begin. UConnect system if the feature(s) are available on your •...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Answer or Reject an Incoming Call - Call to Toggling Between Calls in this section. To combine Currently in Progress two calls, refer to Conference Call in this section. If a call is currently in progress and you have another Place/Retrieve a Call From Hold incoming call, you will hear the same network tones for To put a call on hold, press the PHONE button until you...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 • After the Ready prompt and the following beep, say Three-Way Calling To initiate three-way calling, press the “Voice Recogni- Redial. tion” button while a call is in progress, and make a • The UConnect system will call the last number that second phone call, as described under Making a Second was dialed from your cellular phone.
Page 118: Uconnect System Features
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After the ignition key is switched to OFF, a call can After selecting one of the languages, all prompts and continue on the UConnect system for a certain dura- voice commands will be in that language. tion, after which the call is automatically transferred NOTE: After every UConnect language change opera- from the UConnect system to the mobile phone.
Page 119 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 • After the Ready prompt and the following beep, say Towing Assistance Emergency and the UConnect system will instruct If you need towing assistance: the paired cellular phone to call the emergency num- •...
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE certain companies, which time out a little too soon to sequence on your cellular phone keypad, you can press work properly with the UConnect system. the “Voice Recognition” button and say the sequence you wish to enter, followed by the word Send.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 • Press the PHONE button to begin. NOTE: • You may not hear all of the tones due to cellular phone • After the Ready prompt and the following beep, say network configurations; this is normal. Setup Confirmations.
Page 122: Advanced Phone Connectivity
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Following the beep, say Mute. dialing a number with your paired Bluetooth cellular phone, the audio will be played through your vehicle’s In order to un-mute the UConnect system: audio system. The UConnect system will work the same •...
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • The UConnect system will play the phone names of Connect or Disconnect Link Between the UConnect System and Cellular Phone all paired cellular phones in order from the highest to Your cellular phone can be paired with many different the lowest priority.
Page 124: Things You Should Know About Your Uconnect System
122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The selected phone will be used for the next phone Things You Should Know About Your UConnect call. If the selected phone is not available, the System UConnect system will return to using the highest UConnect Tutorial priority phone present in or near (approximately To hear a brief tutorial of the system features, press the...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 • Speak normally, without pausing, just as you would Repeat the words and phrases when prompted by the UConnect system. For best results, the Voice Training speak to a person sitting a few feet/meters away from session should be completed when the vehicle is parked you.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When navigating through an automated system such • In a convertible vehicle, system performance may be as voice mail, or when sending a page, at the end of compromised with the convertible top down. speaking the digit string, make sure to say Send.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 • Performance, such as audio clarity, echo, and loudness Bluetooth Communication Link to a large degree rely on the phone and network, and Cellular phones have been found to lose connection to not the UConnect system. the UConnect system.
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 133: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 General Information SEATS This device complies with Part 15 of the FCC rules and Seats are a primary part of the Occupant Restraint RSS 210 of Industry Canada. Operation is subject to the (protection) System of the vehicle.
Page 134: Manual Front And Second Row Seat Adjuster
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Manual Front And Second Row Seat Adjuster Using body pressure, move forward and rearward on the The adjusting bar is located under the front of the seat. seat to be sure the seat adjusters have latched. Pull the bar up and move the seat to the desired position.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 CAUTION! DO NOT place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’s path.
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped This feature heats the front driver and passenger seats. The controls for front heated seats are located on the center instrument panel area. The switch in- dicator lights will show when the HIGH or LOW heat is ON.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 WARNING! Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care when using the seat heater.
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE seatback to its normal position. Using body pressure, lean WARNING! forward and rearward on the seat to be sure the seatback has latched. DO NOT ride with the seatback reclined so that the shoulder belt is no longer resting against your chest.
Page 139: Stow 'N Go Seating - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Manual Lumbar Adjust Lever — If Equipped Stow ’n Go Seating — If Equipped The lumbar adjustment handle is located on the outboard On vehicles equipped with Stow ’n Go seating, the side of the seat. To increase the support, rotate the handle second and third row seats may be folded into the floor down.
Page 140 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Slide the storage bin locking mechanism to the un- locked position and then pull up on the storage bin latch to open the cover. Storage Bin Cover Lock Release 1 - Bin Latch 3 - Seatback Release 2 - Storage Pocket...
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 4. Pull up on the seatback recliner lever located on the 5. Pull rearward on the release strap located at the rear of outboard side of the seat and fold the seatback down. To the seat and tumble the seat forward into the storage bin.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold Second Row Seats CAUTION! 1. Slide the storage bin locking mechanism to the un- The storage bin cover must be locked and flat to locked position and then pull up on the storage bin latch avoid damage from contact with the front seat tracks, to open the cover.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 3. Pull up on the seatback recliner lever located on the Second Row Bench Seat — If Equipped outboard side of the seat, to return the seatback to its full While the bench seat does not stow in the floor, it is upright position.
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The power recline feature, located on the side of the seat Remote Third Row Power Seat Switch— If cushion, adjusts the seatback angle forward/rearward Equipped for occupant comfort A One-Touch Third Row Power Folding Seat switch is located in the left rear trim panel as part of a switch-bank.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Left and right third row seats can be folded individually NOTE: The Third Row Power Seat system includes or together. The One Touch Third Row Power Folding obstacle detection for safe operation. When the system Seat adjusts to the following positions using the switch detects an obstacle, the motors will stop and reverse the bank located on the left rear trim panel:...
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull release strap marked “2” to release the anchors. To Unfold Third Row Seats 1. Pull up on the assist strap to lift the seat out of the storage bin and push the seat forward until the anchors latch.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Tailgate Mode 2. To restore the seat to its upright position, lift up on the seatback and push forward until the anchors latch. 1. Pull release strap “2”, then pull release strap “3” to rotate the entire seat rearward.
Page 148: Swivel 'N Go Seating - If Equipped
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To return the seat to its upright position, push rearward WARNING! on the seatback until it latches. Always ensure that it is fully latched. In the event of a collision you could be injured if the seat is not fully latched.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • A side storage pocket that will accommodate a phone To swivel the seat: Pull the lower handle on the outboard or hand-held game side of the seat and push the side of the seatback to begin rotation.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Removing Swivel ’n Go Seating — If Equipped WARNING! 1. Remove any obstructions from the floor behind the Failure to comply with the following conditions seat, and stow the Third Row Seat. could result in serious injury or even death. 2.
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 NOTE: Electrical contacts for the available heated seats Swivel ’n Go Seating Table — If Equipped automatically disengage or engage as the seat is removed The Swivel ’n Go Seating Table consists of an easily or installed.
Page 152 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The table and leg are stored beneath the floor when not in 3. Remove the pole and table top by loosening the hook use. To install the table follow these steps: and loop straps. 1.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 5. Twist the pole in a clockwise rotation until it stops. WARNING! Note: You will hear an audible “click” when the lock button engages the base. Failure to comply with the following conditions could result in serious injury or even death.
Page 154 152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To separate the table top from the pole, follow these 3. While pulling on the latch, pull upward to remove the steps: table top from the pole. 1. Locate the release latch on the underside of the table NOTE: The table top should be removed from the leg top.
Page 155: Understanding The Features Of Your Vehicle 153
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods.
Page 156: Setting Memory Positions And Linking Rke Transmitter To Memory
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Memory Positions And Linking RKE 5. Turn on the radio and set the radio station presets (up to 10 AM and 10 FM stations can be set). Transmitter To Memory NOTE: Each time the SET(S) button and a numbered 6.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 10. Insert the ignition key and turn the ignition switch to To recall the memory settings for driver one, press the ON position. Memory Button 1 on the driver’s door or the UNLOCK button on the Remote Keyless Entry transmitter linked to 11.
Page 158: To Open And Close The Hood
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Disable A RKE Transmitter Linked to Memory To disable another transmitter linked to either Memory Position, repeat steps 1 to 5 for each transmitter. 1. Turn the ignition switch to the OFF position and remove the key.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Hood Release Front View Hood Safety Catch Use the hood prop rod to secure the hood in the open position.
Page 160: Hood Safety Switch - If Equipped
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To prevent possible damage, do not slam the hood to HOOD SAFETY SWITCH — IF EQUIPPED close it. Lower the hood until it is open approximately 12 If the vehicle is equipped with the Electronic Vehicle in (30 cm) and then drop it.
Page 161: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 LIGHTS Interior Lighting All of the lights, except the hazard warning lights, Interior lights are turned on when a door or liftgate is headlamp high beams and flash to pass, are controlled by opened, the keyless entry transmitter is activated, or switches to the left of the steering column on the instru- when the dimmer control is moved to the extreme top.
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Positions Parade Mode (Daytime Brightness Feature) Rotate the dimmer control completely Rotate the dimmer control to the first upward to the second detent (extreme detent. This feature brightens the top position) to turn on the interior odometer, radio and overhead dis- lights, except the front reading/ plays when the park lights or head-...
Page 163: Exterior Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 HALO Lights — If Equipped Daytime Running Lights (Canada/Fleet Vehicles Halo Lights are strategically-placed, soft lighting that Only) helps to illuminate specific areas to aid the occupants in The headlights on your vehicle will illuminate when the locating specific features while driving at night.
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn the headlight switch to the extreme counterclockwise position aligning the indicator with the “A” on the headlight switch.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Headlights On with Wipers — If Equipped The driver can choose, when exiting the vehicle, to have If your vehicle is equipped with Automatic Headlights it the headlights remain on for 30, 60, or 90 seconds, or not also has this customer programmable feature.
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Fog Lights — If Equipped Lights-On Reminder To activate the front fog lights, turn on the park If the headlights or the park lights are left on, or if the lights or the low beam headlights and push in the dimmer control is in the extreme top position after the headlight switch control knob.
Page 167: Multifunction Lever
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 MULTIFUNCTION LEVER If either indicator flashes at a rapid rate, check for a The multifunction control lever is located on the left side defective outside turn signal light bulb. If one of the of the steering column.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn Signal Auto-Mode Tap the multifunction control lever once and the turn signal (left or right) will flash three times, and automati- cally turn off. Turn Signal Warning If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about 1 mi (1.6 km) with the turn signals on, a chime will sound to alert the driver.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 the multifunction lever inward to the second detent will between cycles, to a cycle every 2 seconds. The time delay cause the washers to spray for a maximum of 10 seconds, will be doubled if the vehicle speed is less than 10 mph or until the lever is released, and the wipers will cycle (16 km/h).
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Headlight Low/High Beam Select Switch and WARNING! Flash-to-Pass Headlight Low/High Beam Select Switch When the Sudden loss of visibility through the windshield headlights are turned on, pushing the lever assembly could lead to an accident. You might not see other toward the instrument panel will switch from low beams vehicles or other obstacles.
Page 171: Tilt Steering Column - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 TILT STEERING COLUMN — IF EQUIPPED To tilt the column, pull the small lever downward (located on the steering column and below the steering wheel) to the open position. You may then position the steering wheel up or down, as desired.
Page 172: Rear Park Assist System - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE REAR PARK ASSIST SYSTEM — IF EQUIPPED NOTE: The system will be active until the vehicle speed The Rear Park Assist System provides visual and audible is increased to approximately 11 mph (18 km/h) or indications of the distance between the rear fascia and the above.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Rear Park Assist Warning Display When the ignition switch is turned to the RUN/ON The Rear Park Assist Warning Display, located in the position, the warning display will turn on all of its LEDs headliner near the liftgate glass, provides both visual and for about one second.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARK ASSIST WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: AUDIBLE SIGNAL REAR CENTER REAR CORNERS REAR CENTER 1st LED 78.7 in (200 cm) Yellow Yes, Half Second 2nd LED 51.1 in (130 cm) Yellow None 3rd LED...
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 WARNING! CAUTION! • To avoid vehicle damage the Rear Park Assist Drivers must be careful when backing up even when using the Rear Park Assist System. Always check care- System should only be used as a parking aid and fully behind your vehicle, and be sure to check for is unable to recognize every obstacle, including pedestrians, animals, other vehicles, obstructions, or blind...
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: (Customer Programmable Features)” under “Electronic • Ensure that the rear bumper is free of dirt and debris Vehicle Information Center (EVIC)” in Section 4 of this to keep the system operating properly. manual.
Page 177: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 If SERVICE PARK ASSIST SYSTEM appears in the ADJUSTABLE PEDALS — IF EQUIPPED Electronic Vehicle Information Center (EVIC), after mak- This feature allows both the brake and accelerator pedals to ing sure the rear bumper is clean, please see your move toward or away from the driver to provide improved authorized dealer.
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the button forward to move the pedals forward CAUTION! (toward the front of the vehicle). Do not place any article under the adjustable pedals Press the button rearward to move the pedals rearward or impede its ability to move as it may cause damage (toward the driver).
Page 179: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 ELECTRONIC SPEED CONTROL — IF EQUIPPED Activating Electronic Speed Control When engaged, this device takes over the accelerator Push the ON/OFF button (located in the end of the lever) operation at speeds greater than 25 mph (40 km/h). once and the CRUISE indicator light (located in the message window of the odometer) will illuminate show- ing the electronic speed control system is on.
Page 180 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Setting Electronic Speed Control at a Desired Varying The Speed Setting Speed When the speed control is SET, speed can be increased by When the vehicle has reached the desired speed, press raising and holding the RESUME/ACCEL lever up- the SET lever downward and then release.
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 NOTE: The Electronic Speed Control system has been On steep hills a greater speed loss or gain may occur so designed to shut down if multiple speed control switch it may be preferable to drive without speed control. functions are operated simultaneously in order to ensure WARNING! proper operation.
Page 182: Overhead Consoles
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLES Front Overhead Console — If Equipped Two versions of the overhead console are available. The base front overhead console models feature fixed incan- descent courtesy/reading lights, flip-down sunglass stor- age and conversation mirror. Premium front overhead console models feature an LED focused light that illuminates the instrument panel cup holders, Infrared Automatic Temperature Control Sensor...
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Courtesy/Interior Lighting Sunglass Storage At the forward end of the console are two courtesy lights At the rear of the front overhead console, a compartment (standard dome light has two buttons). The lights turn on is provided for the storage of two pairs of sunglasses.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console had two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry, the lights will also turn on when the unlock button on the transmitter is pressed.
Page 185: Garage Door Opener - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Lighting - If Equipped” under “Lighting” in “Under- standing The Features Of Your Vehicle” in Section 3. GARAGE DOOR OPENER — IF EQUIPPED HomeLink replaces up to three remote controls (hand- held transmitters) that operate devices such as garage door openers, motorized gates, lighting, or home security systems.
Page 186: Programming Homelink
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! Your motorized door or gate will open and close Vehicle exhaust contains carbon monoxide, a danger- while you are training the Universal Transceiver. Do ous gas. Do not run your vehicle in the garage while not train the transceiver if people or pets are in the training the transceiver.
Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 Your vehicle should be parked outside of the garage Watch for the HomeLink indicator to change flash rates. when programming. When it changes, it is programmed. It may take up to 30 seconds, or longer in rare cases. The garage door may Begin Programming open and close while you train.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the indicator light stays on constantly, programming is complete and the garage door (or device) should activate when the HomeLink button is pressed. If the indicator light blinks rapidly for two seconds, and then turns to a constant light, proceed to Step 5 “Pro- gramming A Rolling Code System.”...
Page 189 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 6. Firmly press and release the “Learn” or “Training” Using HomeLink button. The name and color of the button may vary by To operate, simply press and release the programmed manufacturer. HomeLink button. Activation will now occur for the trained device (i.e., garage door opener, gate operator, NOTE: There are 30 seconds in which to initiate the next security system, entry door lock, home/office lighting,...
Page 190: Gate Operator/Canadian Programming
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GATE OPERATOR/CANADIAN PROGRAMMING has successfully accepted the frequency signal. The Canadian radio frequency laws require transmitter sig- indicator light will flash slowly and then rapidly when nals to time-out (or quit) after several seconds of trans- fully trained.
Page 191: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 TROUBLESHOOTING TIPS 2. This device must accept any interference that may be If you are having trouble programming HomeLink , here received including interference that may cause undesired are some of the most common solutions: operation.
Page 192: Power Sunroof Operation
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sunroof Operation Closing the Sunroof Manually To close the sunroof from an open or vent position, press Opening the Sunroof Manually and hold the switch forward. The sunroof will close fully Press the switch rearward and hold, and the sunroof will and stop automatically.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Express-Vent WARNING! Press and release the V button, and the sunroof will automatically open to the vent position. This is called Never leave children in a vehicle, with the keys in Express-Vent. the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power Express-Close sunroof while operating the power sunroof switch.
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Ignition OFF Operation Wind Buffeting The power sunroof switch will remain active for 10 Wind buffeting can be described as the perception of minutes after the ignition switch is turned OFF. Opening pressure on the ears or a helicopter type sound in the either front door will cancel this feature.
Page 195: Electrical Power Outlets - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 ELECTRICAL POWER OUTLETS — IF EQUIPPED The outlets include tethered caps labeled with a key or Two 12 volt power outlets are located in the center lower battery symbol indicating the power source. The lower instrument panel next to the open storage bin.
Page 196: Power Inverter - If Equipped
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER INVERTER — IF EQUIPPED The Power Inverter switch is located near the center of A 110 volt, 150 watt inverter outlet (if equipped) converts the instrument panel below the two 12 volt power DC current to AC current and is located on the left rear outlets.
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 NOTE: WARNING! • When the Inverter Switch is pressed, there will be a delay of approximately one second before the inverter To Avoid Serious Injury or Death: status indicator turns ON. The status indicator of the •...
Page 198: Electrical Outlet Use With Engine Off
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ELECTRICAL OUTLET USE WITH ENGINE OFF SUN SCREENS— IF EQUIPPED Sun Screens are available for second and third row CAUTION! seating windows. The screens store in the sill trim panels and the tops of the windows are equipped with hooks •...
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Gently pull up on the tab to raise the sun screen. Continue pulling the sun screen until the tab is near the top of the window. Sun Screen Extended To lower the sun screen, gently lift the tab upwards to disengage the hooks and feed the screen back into the base sill.
Page 200: Cup Holders And Convenience Tray Drawer
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUP HOLDERS AND CONVENIENCE TRAY DRAWER There are nine cup holders in the interior. Two cup holders in the center front instrument panel, four in the floor consoles and three more are located in the third row quarter trim panel.
Page 201: Interior Bottle Holders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Interior Bottle Holders Smokers Package Kit — If Equipped There are four bottle holders located in the interior. One With the optional authorized dealer-installed Smokers bottle holder is molded into each front interior door trim Package Kit, a removable ash receiver is inserted into one panels, and one bottle holder is molded into each side of the two cup holders in the center front instrument...
Page 202: Console Features
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Basic Console is removable from the vehicle for CONSOLE FEATURES There are two consoles available: Basic and Premium. additional floor space by removing the cap at the console base. Basic Console Basic Console features consist of the following: •...
Page 203: Premium Console - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 To Remove The Basic Floor Console WARNING! • Remove the front anchor cup plug and clip. In an accident, serious injury could result if the • Slide the console base forward while lifting slightly to removable floor console is not properly installed.
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Top Tray Storage • Upper Storage Bin can hold nine regular or 18 thin CD’s or other items • Large Console Center Storage will store headphones for the available rear DVD entertainment system or other items •...
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 can easily be removed for cleaning. The cup holders will Position 2 shows the raised storage tray revealing a large also accommodate large size cups and 20 oz (.6 L) bottles. storage area below. Position 1 shows the console closed with four cup holders and a convenient storage tray.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dual Storage Bins Position 4 shows the complete console in its rearmost Position 3 shows the top portion of the console in a position. Again, lifting second latch handle at the front of rearward position.
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 • Rotate the rear of the console down until it is resting To Remove The Premium Floor Console on the floor bracket • Pull up on the bottom release handle in the front of the •...
Page 208: Storage
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE Glove Compartments There are both upper and lower glove compartments. Upper Glove Compartment To open the upper compartment (1), press inward on the release button (2). The door will spring open about one in (2.54 cm).
Page 209: Door Trim Panel Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 Lower Glove Compartment To open the lower compartment (4) pull out on the release handle (3). The lower compartment handle is also equipped with a lock. Door Trim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage.
Page 210: Driver Seatback Storage - If Equipped
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Sliding Side Door Bottle Holder Driver Seatback Storage — If Equipped Both sliding doors have a bottle holder molded right into The Driver’s Seat Back has a Primary Storage Pocket on the trim. all models and an optional Secondary Mesh Pocket.
Page 211: Second Row Floor Storage Bins - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Second Row Floor Storage Bins — If Equipped Pull up on the storage bin latch to open the cover. Slide The Second Row Seat Storage Bins are located on the the storage bin locking mechanism to the unlocked floor in front of the second row seats.
Page 212: Removing The Floor Console With Stow 'N Go Seating - If Equipped
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To remove the console use the following procedure: WARNING! 1. Open the console lid and remove the storage tray. In an accident, serious injury could result if the seat 2. Pull up on the release handle located inside the floor storage bin covers are not properly latched.
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 4. Pull up on the console to be sure it is firmly attached. WARNING! In an accident, serious injury could result if the removable floor console is not properly installed. Always be sure the removable floor console is fully latched.
Page 214: Rear Compartment Storage
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Compartment Storage Coat Hooks Your vehicle is equipped with open storage areas located Coat hooks are located along the headliner for the second in each rear trim panel. and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg).
Page 215: Roof Luggage Rack - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 The liftgate sill plate has a raised line with the statement ROOF LUGGAGE RACK — IF EQUIPPED “Load To This Line”. This line indicates how far rearward The crossbars and siderails are designed to carry the cargo can be placed without interfering with liftgate weight on vehicles equipped with a luggage rack.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Attempt to move the crossbar again to ensure that it has CAUTION! properly locked into position. • Crossbars should remain equally spaced or paral- NOTE: To help control wind noise when installing the lel at any luggage rack position for proper func- crossbars make sure the arrows marked on the underside tion.
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 CAUTION! WARNING! • Long loads which extend over the windshield, Cargo must be securely tied before driving your such as wood panels or surfboards, or loads with vehicle. Improperly secured loads can fly off the large frontal area should be secured to both the vehicle, particularly at high speeds, resulting in per- front and rear of the vehicle.
Page 218: Umbrella Holder
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UMBRELLA HOLDER LOAD-LEVELING SYSTEM — IF EQUIPPED An umbrella holder has been conveniently molded into The automatic load-leveling system will provide a level the left front door entry scuff molding. riding vehicle under most passenger and cargo loading conditions.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 WARNING! Do not install the load-leveling system on vehicles that are not equipped with Anti-Lock Brakes. Ve- hicles without Anti-Lock Brakes (ABS) have a height- sensing proportioning valve. Installing a leveling system will render this system ineffective, inappro- priately reducing rear brake pressure, resulting in increased stopping distances.
Page 221: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panels And Controls ... . 223 Compass/Temperature Display ... 241 Base Instrument Cluster ....224 Electronic Vehicle Information Center (EVIC) —...
Page 222 220 UNDERSTANDING YOUR INSTRUMENT PANEL Sales Code REQ — AM/FM Stereo Radio And Operation Instructions - CD Mode For CD 6–Disc CD/DVD Changer And MP3 Audio Play ....275 (MP3/WMA AUX Jack) .
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 221 Sales Code RER — Multimedia System — Operating Instructions - Satellite Mode ..290 If Equipped ......285 Operating Instructions - Hands-Free Phone Operating Instructions —...
Page 224 222 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Operation And Cellular Phones ..300 Summer Operation ....319 Remote Sound System Controls —...
Page 225: Instrument Panels And Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 223 INSTRUMENT PANELS AND CONTROLS 1 - Air Vents 6 - Upper Glove Compartment 11 - Storage Bin 16 - Head Light Switch 2 - Instrument Cluster 7 - Lower Glove Compartment 12 - Power Supply 12V 17 - Power Inverter Switch 3 - Gear Selector Lever 8 - Climate Controls...
Page 226: Base Instrument Cluster
224 UNDERSTANDING YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER...
Page 227: Premium Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 225 PREMIUM INSTRUMENT CLUSTER...
Page 228: Instrument Cluster Descriptions
226 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER DESCRIPTIONS light is flashing when the engine is running, immediate service is required and you may experience reduced 1. Fuel Gauge performance, an elevated/rough idle or engine stall and The pointer shows the level of fuel in the fuel tank when your vehicle may require towing.
Page 229 UNDERSTANDING YOUR INSTRUMENT PANEL 227 5. Tire Pressure Monitoring Telltale Lamp — If overheat and can lead to tire failure. Underinflation also Equipped reduces fuel efficiency and tire tread life, and may affect Each tire, including the spare (if provided), the vehicle’s handling and stopping ability.
Page 230 228 UNDERSTANDING YOUR INSTRUMENT PANEL as intended. TPMS malfunctions may occur for a variety CAUTION! of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the The TPMS has been optimized for the original TPMS from functioning properly.
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 For additional information on Tire Pressures, refer to chime will sound for four minutes. After the chime turns Section 5 — Starting and Operating, “Tire Inflation off, the engine will still be critically hot until the light Pressures”...
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL turned to the “ON” position. They should go out with the indicated by the Brake Warning Light which will turn on engine running. If the “ESP/BAS Warning Lamp” comes when the brake fluid level in the master cylinder has on continuously with the engine running, a malfunction dropped below a specified level.
Page 233 UNDERSTANDING YOUR INSTRUMENT PANEL 231 Vehicles equipped with the Anti-Lock Brake System 12. Vehicle Security Light — If Equipped (ABS), are also equipped with Electronic Brake Force This light will flash at a fast rate for approxi- Distribution (EBD). In the event of an EBD failure, the mately 16 seconds when the vehicle security Brake Warning Light will turn on along with the ABS alarm is arming and then will flash slowly until...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL brakes. If the ABS light does not turn on when the 16. High Beam Light Ignition switch is turned to the ON position, have the This light shows that the headlights are on high light inspected by an authorized dealer. beam.
Page 235 UNDERSTANDING YOUR INSTRUMENT PANEL 233 19. Malfunction Indicator Light 20. Airbag Light This light is part of an onboard diagnostic system This light turns on and remains on for seven called OBD that monitors engine and automatic seconds as a bulb check when the ignition transmission control systems.
Page 236 234 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Driving with a hot engine cooling system could A hot engine cooling system is dangerous. You or damage your vehicle. If temperature gauge reads others could be badly burned by steam or boiling “H“, pull over and stop the vehicle.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 To reset a message display (gATE, gASCAP, noFUSE, 24. Odometer Display Area CHAngE OIL, LoCOOL, LoWASH), push and hold the When the appropriate conditions exist, the following button until the display resets (approximately two sec- odometer messages will display: onds).
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Some of the above warnings will be displayed in release the Trip / Odometer Display reset button on the the Compass Mini-Trip Computer / Electronic Vehicle instrument cluster. To reset the oil change indicator Information Center Display Area under the Speedometer.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 U.S. federal regulations require that upon transfer of 26. Compass Mini-Trip Computer (CMTC) Display / vehicle ownership, the seller certify to the purchaser the Electronic Vehicle Information Center (EVIC) Display— correct mileage that the vehicle has been driven. There- If Equipped fore, if the odometer reading is changed during repair or Compass Mini-Trip Computer (CMTC) Display —...
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Change Required 2. Fully depress the accelerator pedal slowly three times within 10 seconds. Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message 3. Turn the ignition switch to the OFF/LOCK position. will flash in the Electronic Vehicle Information Center NOTE: If the indicator message illuminates when you (EVIC) display for approximately 10 seconds after a...
Page 241: Compass Mini-Trip Computer (Cmtc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 239 28. Fuel Door Reminder Compass Mini-Trip Computer (CMTC) Odometer The arrow in this symbol is a reminder that the Displays Fuel Filler Door is located on the left side of the When the appropriate conditions exist, the following vehicle.
Page 242: Compass Mini-Trip Computer (Cmtc) Reset Buttons
240 UNDERSTANDING YOUR INSTRUMENT PANEL Compass Mini-Trip Computer (CMTC) Reset When the appropriate conditions exist, the following odometer messages will display: Buttons CMTC Reset Button NE. Eight-point compass headings are displayed (N, S, E, Press the left reset button located on the instrument W, NE, NW, SE, SW) cluster to scroll through the sub menus (i.e., Trip Func- 14°F.
Page 243: Compass/Temperature Display
UNDERSTANDING YOUR INSTRUMENT PANEL 241 Compass Mini-Trip Computer (CMTC) Trip Compass/Temperature Display Odometer (ODO) Compass Variance This display shows the distance traveled since the last Compass Variance is the difference between magnetic reset. Press and release the right button located on the North and Geographic North.
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL To Set the Variance Manual Compass Calibration If the compass appears erratic, inaccurate or abnormal, NOTE: Refer to the “Compass Variance Map” in the you may wish to calibrate the compass. Prior to calibrat- following “Electronic Vehicle Information...
Page 245: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 243 • Compass display ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED • Outside temperature display NOTE: The compass on your vehicle is self-calibrating, • Trip computer functions eliminating the need to manually calibrate the compass. •...
Page 246: Evic Displays
244 UNDERSTANDING YOUR INSTRUMENT PANEL Press the STEP button to scroll through sub EVIC Displays menus (i.e. Trip Functions, Avg. Fuel Economy, When the appropriate conditions exist, the EVIC displays DTE, Elapsed Time, and Units. the following messages: • Door(s) Ajar (with a single chime if vehicle is in Steering Wheel EVIC Compass/Temp motion) Control Button as it appears on the...
Page 247 UNDERSTANDING YOUR INSTRUMENT PANEL 245 • Left Rear Turn Signal Light Out Unless reset, this message will continue to display each time you turn the ignition switch to the ON/RUN • Right Front Turn Signal Light Out position. To turn off the message temporarily, press and •...
Page 248: Trip Functions
246 UNDERSTANDING YOUR INSTRUMENT PANEL TRIP FUNCTIONS determined by a weighted average of the instantaneous Press and release the MENU button until one of the and average fuel economy, according to the current fuel following Trip Functions displays in the EVIC: tank level.
Page 249: Compass Display
UNDERSTANDING YOUR INSTRUMENT PANEL 247 Display Units of Measure in: Automatic Compass Calibration To make your selection, press and release the STEP This compass is self-calibrating, which eliminates the button until “US” or “METRIC” appears. need to manually reset the compass. When the vehicle is new, the compass may appear erratic and the EVIC will To Reset The Display display CAL until the compass is calibrated.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Press the STEP button until “Calibrate Compass” is Compass Variance displayed in the EVIC. Compass Variance is the difference between magnetic North and Geographic North. In some areas of the 4. Press and release the RESET button to start the cali- country, the difference between magnetic and geographic bration.
Page 251: Personal Settings (Customer Programmable Features)
UNDERSTANDING YOUR INSTRUMENT PANEL 249 1. Turn the ignition switch ON. 2. Press and hold the compass button for approximately two seconds. 3. Press the STEP button until “Compass Variance” mes- sage and the last variance zone number displays in the EVIC.
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL Press and release the MENU button until Personal Set- Unlock Doors Automatically on Exit tings displays in the EVIC. When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or Use the Step button to display one of the following NEUTRAL position and the driver’s door is opened.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 Sound Horn with Remote Key Lock SELECT button until YES (Y) or NO (N) appears. Refer to When ON is selected, a short horn sound will occur when “Lights/SmartBeams — If Equipped” in Section 3 of this the remote keyless entry LOCK button is pressed.
Page 254: Radio General Information
252 UNDERSTANDING YOUR INSTRUMENT PANEL when exiting the vehicle. To make your selection, press Rear Park Assist System — If Equipped and release the RESET button until 0, 30, 60, or 90 When ENABLE is selected, the Rear Park Assist System is appears.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 you understand and save you concern about these “ap- FM Reception parent” malfunctions, you must understand a point or Because FM transmission is based on frequency varia- two about the transmission and reception of radio sig- tions, interference that consists of amplitude variations nals.
Page 256: Sales Code Req - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
254 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REQ — AM/FM STEREO RADIO When the audio system is turned on, the sound will be set at the same volume level as last played. AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) SEEK Buttons NOTE: The radio sales code is located on the lower right Press and release the SEEK buttons to search for the next side of your radio faceplate.
Page 257 UNDERSTANDING YOUR INSTRUMENT PANEL 255 Voice Recognition Button (UConnect Hands-Free TIME Button Phone) — If Equipped Press the TIME button and the time of day will display. In Press this button to operate the Hands-Free Phone AM or FM mode, pressing the TIME button will switch (UConnect ) feature (if equipped).
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL The clock can also be set by pressing the SETUP button Setting the Tone, Balance, and Fade and selecting the “SET HOME CLOCK” entry. Once in Push the rotary Tune/Scroll control knob and BASS will this display follow the above procedure, starting at Step display.
Page 259 UNDERSTANDING YOUR INSTRUMENT PANEL 257 Push the rotary Tune/Scroll control knob a fifth time and 16-Digit Character Program Type FADE will display. Turn the Tune/Scroll control knob to Display the left or right to adjust the sound level between the No program type or un- None front and rear speakers.
Page 260 258 UNDERSTANDING YOUR INSTRUMENT PANEL station with the same selected Music Type name. The 16-Digit Character Program Type Music Type function only operates when in the FM Display mode. Rhythm and Blues R & B Religious Music Rel Musc If a preset button is activated while in the Music Type (Program Type) mode, the Music Type mode will be Religious Talk Rel Talk...
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 • DISC Play/Pause - You can toggle between NOTE: These selections can only be made while playing playing the DVD and pausing the DVD by a DVD. pushing the SELECT button (if equipped). • VES Power - Allows you to turn VES on and off (if equipped).
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL Menu Language — If Equipped Subtitle Language — If Equipped Selecting this item will allow the user to choose the Selecting this item allows you to choose a default subtitle default startup DVD menu language (effective only if language (effective only if the language is supported by language supported by disc).
Page 263 UNDERSTANDING YOUR INSTRUMENT PANEL 261 Aspect Ratio — If Equipped SET Button — To Set the Pushbutton Memory When you are receiving a station that you wish to Selecting this item allows you to choose between wide commit to pushbutton memory, press the SET button. screen, pan scan, and letter box.
Page 264: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
262 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding CAUTION! button number will display. The radio may shut down during extremely hot Buttons 1 - 6 conditions. When this occurs, the radio will indicate These buttons tune the radio to the stations that you “Disc Hot”...
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 Radio display will show LOADING DISC when the disc Press and hold the EJECT button for five seconds and all is loading and “READING DISC” when the radio is CDs will be ejected from the radio. reading the disc.
Page 266: Notes On Playing Mp3/Wma Files
264 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (CD MODE) Supported Medium Formats (File Systems) Press and hold FF (Fast Forward) and the CD player will The medium formats supported by the radio are ISO 9660 begin to fast forward until FF is released, or RW or Level 1 and Level 2 and includes the Joliet extension.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 Multisession disc formats are supported by the radio. When using the MP3/WMA encoder to compress audio Multisession discs may contain combinations of normal data to an MP3/WMA file, the bit rate and sampling CD audio tracks and computer files (including MP3/ frequencies in the following table are supported.
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL WMA File Format Loading times for playback of MP3/WMA files may be affected by the following: WMA Specifica- Sampling Fre- Bit Rate (kbps) tion quency (kHz) • Media - CD-RW media may take longer to load than 48, 64, 96, 128, CD-R media 44.1 and 48...
Page 269: List Button (Disc Mode For Mp3/Wma Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 267 LIST Button (DISC Mode for MP3/WMA Play) Press and hold the INFO button again for three seconds Pressing the LIST button will bring up a list of all folders to return to elapsed time display. on the disc.
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL SCAN Button (Auxiliary Mode) Operating Instructions — Voice Recognition No function. System (VR) (If Equipped) For the radio, refer to “Voice Recognition System (VR)” in EJECT Button (Auxiliary Mode) Section 3. No function. For UConnect “Voice Recognition System (VR)” refer to “Hands-Free Communication (UConnect )”...
Page 271: Sales Code Res - Am/Fm Stereo Radio With Cd Player (Mp3 Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 269 Dolby SALES CODE RES — AM/FM STEREO RADIO Manufactured under license from Dolby Laboratories. WITH CD PLAYER (MP3 AUX JACK) Dolby and the double-D symbol are trademarks of NOTE: The radio sales code is located on the lower right Dolby Laboratories.
Page 272: Operating Instructions - Radio Mode
270 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 If your vehicle is not equipped with or this feature is not 2. Adjust the hours by turning the right side Tune/Scroll available on your vehicle, a “Not Equipped With control knob. UConnect” message will display on the radio screen. 3.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Push the rotary Tune/Scroll control knob a second time Press the INFO button for an RDS station (one with call and MID will display. Turn the Tune/Scroll control knob letters displayed). The radio will return a Radio Text to the right or left to increase or decrease the mid-range message broadcast from an FM station (FM mode only).
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 MUSIC TYPE Button 16-Digit Character Program Type Pressing this button once will turn on the Music Type Display mode for five seconds. Pressing the MUSIC TYPE button Foreign Language Language or turning the Tune/Scroll control knob within five Information Inform seconds will allow the program format type to be se-...
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL • Set Clock — Pressing the SELECT button will allow 16-Digit Character Program Type you to set the clock. Turn the Tune/Scroll control knob Display to adjust the hours and then press and turn the Sports Sports Tune/Scroll control knob to adjust the minutes.
Page 277: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 275 You may add a second station to each pushbutton by Operation Instructions - CD MODE for CD and repeating the above procedure with this exception: Press MP3 Audio Play the SET button twice and SET 2 will show in the display NOTE: The ignition switch must be in the ON or ACC window.
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL begin to play when you insert the disc. The display will EJECT Button - Ejecting a CD show the disc number, the track number, and index time Press the EJECT button to eject the CD. in minutes and seconds.
Page 279: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 277 the current selection. Pressing and holding the SEEK AM or FM Button button will allow faster scrolling through the tracks in Switches the AM or FM radio to the opposite radio mode. CD, MP3 modes. RND Button (Random Play Button) SCAN Button Press this button while the CD is playing to activate...
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL Supported Media (Disc Types) a number instead. With a maximum number of files, The MP3 file recording media supported by the radio are exceeding 20 folders will result in this display. With CDDA, CD-R, CD-RW, MP3, and CDDA+MP3. 200 files, exceeding 50 folders will result in this display.) Supported Medium Formats (File Systems)
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 Supported MP3 File Formats MPEG Specifi- Sampling Fre- Bit Rate (kbps) The radio will recognize only files with the *.MP3 exten- cation quency (kHz) sion as MP3 files. Non-MP3 files named with the *.MP3 320, 256, 224, extension may cause playback problems.
Page 282: List Button (Cd Mode For Mp3 Play)
280 UNDERSTANDING YOUR INSTRUMENT PANEL Playback of MP3 Files LIST Button (CD Mode for MP3 Play) When a medium containing MP3 data is loaded, the Pressing the LIST button will bring up a list of all folders radio checks all files on the medium. If the medium on the disc.
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 Press and hold the INFO button again for three seconds TIME Button (Auxiliary Mode) to return to elapsed time display. Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is Operation Instructions - Auxiliary Mode OFF).
Page 284: Sales Code Ren - Multimedia System - If Equipped
282 UNDERSTANDING YOUR INSTRUMENT PANEL SALES CODE REN — MULTIMEDIA SYSTEM — IF through the system’s wireless headphones. This means rear seat passengers can watch a DVD on the optional EQUIPPED rear seat entertainment system, while the driver and NOTE: The sales code is located on the lower right side front-seat passenger listen to the radio.
Page 285: Operating Instructions - Voice Recognition
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Operating Instructions — Voice Recognition 3. To move the hour forward, touch the screen where the System (VR) (If Equipped) word “Hour” with the arrow pointing upward is dis- For the radio, refer to “Voice Recognition System (VR)” in played.
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Touch the screen where the time is displayed. The Touch the screen where the words “Show Time if Radio is clock setting menu will appear on the screen. Off” are displayed to change the current setting. 3.
Page 287: Sales Code Rer - Multimedia System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 285 SALES CODE RER — MULTIMEDIA SYSTEM — IF The satellite navigation capability combines a Global- EQUIPPED Positioning System (GPS)-based navigation system with an integrated color screen to provide maps, turn identi- NOTE: The sales code is located on the lower right side fication, selection menus, and instructions for selecting a of the unit’s faceplate.
Page 288: Operating Instructions - Satellite Radio
286 UNDERSTANDING YOUR INSTRUMENT PANEL Other special features include direct tune, music type Clock Setting Procedure selections, traffic messaging (optional), easy store presets, The GPS receiver in this system is synchronized to the parental lockout for VES (if equipped), backup camera time data being transmitted by the GPS satellites.
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 4. Touch the screen where the words “Set Time Zone” are 3. When this feature is on, a check mark will appear in displayed. The time zone selection menu will appear on the box next to the words “Daylight Savings.” Touch the the screen.
Page 290: Satellite Radio - If Equipped (Ren/Req/Rer/Res/Reu Radios Only)
288 UNDERSTANDING YOUR INSTRUMENT PANEL 4. To move the hour forward, touch the screen where the 2. Touch the screen where the time is displayed. The word “Hour” with the arrow pointing upward is dis- clock setting menu will appear on the screen. played.
Page 291: System Activation
UNDERSTANDING YOUR INSTRUMENT PANEL 289 System Activation To access the ESN/SID, refer to the following steps: Sirius Satellite Radio service is pre-activated, and you ESN/SID Access With REQ/RES Radios may begin listening immediately to the one year of audio With the ignition switch in the ON/RUN or ACC posi- service that is included with the factory-installed satellite tion and the radio on, press the SETUP button and scroll radio system in your vehicle.
Page 292: Selecting Satellite Mode
290 UNDERSTANDING YOUR INSTRUMENT PANEL Next, turn the knob surrounding the joystick in the center Reception Quality of the radio to scroll to Subscription, and then press and Satellite reception may be interrupted due to one of the release the joystick. All of the ESNs that apply to your following reasons: vehicle will display.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 SEEK Buttons additional three seconds will make the radio display the Press and release the SEEK buttons to search for the next Song Title all of the time (press and hold again to return channel in Satellite mode. Press the right switch to seek to normal display).
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the Tune/Scroll control knob within five Pressing the MUSIC TYPE button again will close the seconds will allow the program format type to be se- MUSIC TYPE screen. Once closed, seek up, seek down, lected.
Page 295: Operating Instructions - Hands-Free Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 293 selected within five seconds after pressing the SET but- Operating Instructions - Hands-Free Phone (If ton, the channel will continue to play but will not be Equipped) stored into pushbutton memory. Refer to “Hands-Free Communication (UConnect )” in Section 3.
Page 296: Connecting The Ipod Device
294 UNDERSTANDING YOUR INSTRUMENT PANEL This feature allows you to plug an iPod mobile digital Connecting The iPod Device device into the vehicle’s sound system through a connec- Use the optional connection cable to connect an iPod to tor (UCI connector) using an optional connection cable the vehicle’s UCI connector (which is located in the glove (available through MOPAR ).
Page 297: Play Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 295 Play Mode RW (Rewind) Button When switched to UCI mode the iPod will be in Play Press and hold the RW button to move backward in the mode. In Play mode, you may use the following buttons current track.
Page 298: List Or Browse Mode
296 UNDERSTANDING YOUR INSTRUMENT PANEL previous track in the list; if you press this button at any SCAN Button other time in the current track it will go back to the Pressing the SCAN button will play the first five seconds beginning of the track.
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 Tune/Scroll Knob Radio Preset Buttons In the List mode, the Tune/Scroll knob functions in a In the List mode, the radio preset buttons are used as similar manner as the scroll wheel on the iPod . shortcuts to the following lists on the iPod device.
Page 300: Sirius Backseat Tv&Trade; - If Equipped
298 UNDERSTANDING YOUR INSTRUMENT PANEL LIST Button SIRIUS BACKSEAT TV™ — IF EQUIPPED Pressing the LIST button will take to the top level menu Satellite video uses direct satellite receiver broadcasting of the iPod . This takes you to the same top level menu technology to provide streaming video coast to coast.
Page 301: Video Entertainment System (Ves ) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Nine different medias to choose from in each screen VIDEO ENTERTAINMENT SYSTEM (VES ) — IF EQUIPPED (AM, FM, Sirius Radio, DVD1, DVD2, Hard Drive The optional VES (Video Entertainment System) is Jukebox, AUX in radio, AUX1, AUX2). available with: The LCD screen(s) are located in the overhead compart- •...
Page 302: Radio Operation And Cellular Phones
300 UNDERSTANDING YOUR INSTRUMENT PANEL RADIO OPERATION AND CELLULAR PHONES Under certain conditions, the cellular phone being ON in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio.
Page 303: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 301 decrease the volume. Pressing the center button changes CD Player the operation of the radio from AM to FM or Tape to CD Pressing the top of the switch once will go to the next mode depending on which radio is in the vehicle.
Page 304: Climate Controls
302 UNDERSTANDING YOUR INSTRUMENT PANEL 2. If a disc is stained, clean the surface with a soft cloth, CLIMATE CONTROLS wiping from center to edge. The Climate Control System allows you to regulate the temperature, amount, and direction of air circulating 3.
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 Front Blower Control There are four blower speeds. Use this control to regulate the amount of air forced through the system in any mode you select. The blower speed increases as you move the control clockwise from the off position.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If your air conditioning performance seems PANEL Mode lower than expected, check the front of the A/C con- Air is directed through the outlets in the instrument denser (located in front of the radiator), for an accumu- panel.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 MIX Mode RECIRCULATION Control Air is directed through the floor, defrost and side Press this button to choose window demist outlets. This setting works best in between outside air intake or cold or snowy conditions that require extra heat at recirculation of the air inside the windshield.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL • In cold or damp weather, the use of the RECIRCULA- ECONOMY Mode TION mode will cause windows to fog on the inside If ECONOMY mode is desired, press the A/C button to because of moisture build-up inside the vehicle. For turn off the indicator light and the A/C compressor.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 MAX A/C For maximum cooling use the A/C and RECIRCULA- TION mode buttons at the same time. Three Zone Basic Temperature Control — If Equipped With the Three Zone Basic Temperature Control System, each front seat occupant can independently control the Heating, Ventilation, and Air Conditioning (HVAC) op- erations coming from the outlets on their side of the vehicle.
Page 310: Rear Manual Climate Control Zone - If Equipped
308 UNDERSTANDING YOUR INSTRUMENT PANEL The Three Zone Basic Temperature Control bottom panel The primary control for the rear blower is on the front controls rear Heating, Ventilation, and Air Conditioning climate control unit located on the instrument panel. (HVAC) operations. The front climate control unit has five positions, off, rear, and a range of blower speeds.
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 Only when the front control for the rear blower is in the RR position do the second seat occupants have control of the rear blower speed. The rear blower control, located in the rear overhead console has an off position and a range of blower speeds.
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Temperature Control control is in FLOOR, DEFROST, or MIX modes, airflow When the blower knob on the front climate control unit is will be directed out of the rear floor outlets. set to any position other than RR , the rear temperature Rear Mode Control selection follows the setting of the rear temperature control knob on the front climate control unit.
Page 313: Automatic Temperature Control (Atc) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 311 AUTOMATIC TEMPERATURE CONTROL (ATC) — The Infrared Three-Zone ATC System automatically IF EQUIPPED maintains the interior comfort level desired by the driver and all passengers. This is accomplished by an infrared • Front Three Zone ATC allows both the driver and front sensor, located in the forward overhead console.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL Below the automatic control, the system selects the appropriate mode (airflow outlets) and fan speed. Front Upper ATC Panel 1 - Left On/Off 9 - Right On/Off 2 - Blower 10 - AUTO Temp Front Lower ATC Panel 3 - Left Front Temp 11 - MODE 1 - Blower...
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Operation of the system is quite simple. NOTE: • It is not necessary to move the temperature settings for 1. Press the AUTO button and the word AUTO will cold or hot vehicles. The system automatically adjusts illuminate in the front ATC display, along with three the temperature, mode and fan speed to provide temperatures for Driver’s, Passenger, and Rear seats.
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Operation PANEL Mode This system offers a full complement of manual override Air comes from the outlets in the instrument panel. features. The AUTO symbol in the front ATC display will Each of these outlets can be individually adjusted to be turned off when the system is being used in the direct the flow of air.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 FLOOR Mode The SNOWFLAKE mode or A/C button allows Air comes from the floor outlets. A slight amount of the operator to manually activate or deactivate the air is directed through the defrost and side window air conditioning system.
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL a second time to turn off the RECIRCULATION mode The REAR SYSTEM control for the Rear ATC System is LED and allow outside air into the vehicle. on the front ATC control unit located on the instrument panel.
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 Operation of the rear system is quite simple. 1. Press the REAR LOCK button on the front ATC control unit. This turns off the REAR LOCK icon in the rear temperature knob. 2. Rotate the Rear Blower, Rear Temperature and the Rear Mode Control knobs to suit your comfort needs.
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: CAUTION! • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts Interior air enters the Rear Automatic Temperature the temperature, mode and fan speed to provide Control System through an intake grille located in comfort as quickly as possible.
Page 321: Summer Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 319 When rear controls are locked by the front system, the HEADLINER Mode LOCK symbol on the temperature knob is illuminated Air comes from the outlets in the headliner. Each of and any rear overhead adjustments are ignored. these outlets can be individually adjusted to direct the flow of air.
Page 322: Vacation/Storage
320 UNDERSTANDING YOUR INSTRUMENT PANEL “Maintenance Procedures”, of this manual for proper WINDOW FOGGING coolant selection. Use of the air RECIRCULATION mode Vehicle windows tend to fog on the inside in mild rainy during winter months is not recommended because it or humid weather.
Page 323: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 321 OPERATING TIPS A/C AIR FILTER — IF EQUIPPED On vehicles equipped with Automatic Temperature Con- trol (ATC), the climate control system filters out dust and pollen from the air. Refer to Section 7 “Air Conditioning” for filter replacement instructions.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: You may turn off the heated mirror feature at anytime by pressing the rear window defogger switch a second time. CAUTION! To avoid damaging the electrical conductors of the rear window defroster, do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the window.
Page 325: Starting And Operating
STARTING AND OPERATING CONTENTS Starting Procedures ..... 326 Brake System ......339 Automatic Transmission .
Page 326 324 STARTING AND OPERATING Driving Through Water ....349 Fuel Requirements ..... . 379 Flowing/Rising Water .
Page 327 STARTING AND OPERATING 325 Cruising Range ..... . . 389 Trailer Towing ......394 Replacement Parts .
Page 328: Starting Procedures
326 STARTING AND OPERATING STARTING PROCEDURES WARNING! Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if • NEVER leave unattended children alone in a ve- present, instruct all other occupants to buckle their seat hicle.
Page 329: Automatic Transmission
STARTING AND OPERATING 327 Automatic Transmission NOTE: This vehicle is equipped with a transmission The gear selector lever must be in the NEUTRAL or shift interlocking system. The brake pedal must be PARK position before you can start the engine. Depress depressed to shift out of PARK.
Page 330 328 STARTING AND OPERATING If The Engine Fails To Start If the engine fails to start after you have followed the “Normal Starting” procedure, it may be flooded. Push WARNING! the accelerator pedal all the way to the floor and hold it there while cranking the engine.
Page 331: Engine Block Heater - If Equipped
STARTING AND OPERATING 329 If the engine shows no sign of starting after two 15– The engine block heater cord is routed under the hood on second intervals of cranking with the accelerator pedal the driver’s side of the vehicle. It has a removable cap held to the floor, the “Normal Starting”...
Page 332: Automatic Transmission
330 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! CAUTION! It is dangerous to shift the gear selector lever out of PARK or NEUTRAL if the engine speed is higher Damage to the transmission may occur if the follow- than idle speed. If your foot is not firmly on the ing precautions are not observed: brake pedal, the vehicle could accelerate quickly •...
Page 333: Four-Speed Or Six-Speed Automatic Transmission
STARTING AND OPERATING 331 while the ignition switch is in the ON position. Always NOTE: If a malfunction occurs, the system will trap the press the brake pedal first before moving the gear selec- key in the ignition cylinder to warn you that this safety tor lever out of PARK.
Page 334 332 STARTING AND OPERATING the instrument cluster will display transmission gear When parking on a hill, it is important to set the parking selection as 6, 5, 4, 3, 2, 1 for six-speed and 4, 3, 2, 1 for brake before placing the shift lever in PARK, otherwise four-speed transmissions.
Page 335 STARTING AND OPERATING 333 The following indicators should be used to ensure that WARNING! you have engaged the transmission gear selector lever into the PARK position: Unintended movement of a vehicle could injure • When shifting the gear selector lever into PARK, those in and near the vehicle.
Page 336 334 STARTING AND OPERATING CAUTION! WARNING! Before moving the gear selector lever out of PARK, Do not coast in NEUTRAL and never turn off the you must turn the ignition from LOCK/OFF to ON so ignition to coast down a hill. These are unsafe the steering wheel and gear selector lever are re- practices that limit your response to changing traffic leased.
Page 337 STARTING AND OPERATING 335 using the “5” range will improve performance and CAUTION! extend transmission life by reducing excessive shifting and heat build-up. If the transmission operating temperature exceeds acceptable limits, the vehicle computer will override DRIVE — Four-Speed Transmission DRIVE and select “5”...
Page 338 336 STARTING AND OPERATING Switching from ERS to D-Mode (Drive) can be done at Odometer any vehicle speed. To shift from “Drive” mode to “ERS” Screen Display mode, move gear selector lever to the left (-) once. The Actual Gear(s) current gear will be maintained as the top gear.
Page 339: Reset Mode - Electronic Transmission
STARTING AND OPERATING 337 Reset Mode - Electronic Transmission 5. Shift into the desired gear range and resume driving. The transmission is monitored electronically for abnor- NOTE: Even if the transmission can be reset, it is mal conditions. If a condition is detected that could cause recommended that you visit an authorized dealer at your damage, the transmission automatically shifts into 2nd earliest possible convenience.
Page 340 338 STARTING AND OPERATING selector lever in the PARK position. To release the park- before placing the gear selector lever in PARK, otherwise ing brake, depress the emergency break pedal a second the load on the transmission locking mechanism may time and let your foot up as you feel the brake disengage.
Page 341: Brake System
STARTING AND OPERATING 339 BRAKE SYSTEM WARNING! Your vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic NEVER leave children alone in a vehicle. Leaving systems loses normal capability, the remaining unattended children in a vehicle is dangerous for a system will still function.
Page 342: Anti-Lock Brake System (Abs)
340 STARTING AND OPERATING ANTI-LOCK BRAKE SYSTEM (ABS) WARNING! ABS provides increased vehicle stability and brake per- formance under most braking conditions. The system • Riding the brakes can lead to brake failure and automatically “pumps” the brakes during severe braking possibly an accident.
Page 343 STARTING AND OPERATING 341 • A slight drop or fall away of the brake pedal at the end WARNING! of the stop. • The Anti-Lock Brake System cannot prevent acci- WARNING! dents, including those resulting from excessive speed in turns, following another vehicle too •...
Page 344: Electronic Brake Control Systems
342 STARTING AND OPERATING Anti-Lock Brake Light to the ABS system is required. Consult with your autho- The ABS light monitors the Anti-Lock System. rized dealer service center as soon as possible. The light will come on when the ignition ELECTRONIC BRAKE CONTROL SYSTEMS switch is turned to the ON position and may Your vehicle is equipped with an advanced electronic...
Page 345 STARTING AND OPERATING 343 spinning faster than the other, the system will apply the WARNING! brake of the spinning wheel. This will allow more engine torque to be applied to the wheel that is not spinning. • The TCS cannot prevent the natural laws of phys- This feature remains active even if the ESP is in the ics from acting on the vehicle, nor can it increase “Partial Off”...
Page 346 344 STARTING AND OPERATING Brake Assist System (BAS) WARNING! The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The • BAS (Brake Assist System) cannot prevent the system detects an emergency braking situation by sens- natural laws of physics from acting on the vehicle, ing the rate and amount of brake application and then nor can it increase the traction afforded by prevail-...
Page 347 STARTING AND OPERATING 345 Electronic Stability Program (ESP) ESP ON This system enhances directional control and stability of This is the normal operating mode for ESP on 2WD the vehicle under various driving conditions. ESP cor- vehicles. Whenever the vehicle is started, the ESP system rects for over/under steering of the vehicle by applying will be in this mode.
Page 348 346 STARTING AND OPERATING gain traction. To turn ESP on again, momentarily depress Light comes on continuously with the engine running, a the ESP OFF switch. This will restore the normal ESP ON malfunction has been detected in either the ESP or the mode of operation.
Page 349: Power Steering
STARTING AND OPERATING 347 POWER STEERING WARNING! The standard power steering system will give you good vehicle response and increased ease of maneuverability Continued operation with reduced power steering in tight spaces. The system will provide mechanical assist could pose a safety risk to yourself and others. steering capability if power assist is lost.
Page 350: Driving On Slippery Surfaces
348 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES TRACTION When driving on wet or slushy roads, it is possible for a ACCELERATION wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 351: Driving Through Water
STARTING AND OPERATING 349 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Caution safety and prevent damage to your vehicle.
Page 352 350 STARTING AND OPERATING CAUTION! WARNING! • Driving through standing water may cause dam- • Driving through standing water limits your vehi- age to your vehicle’s drivetrain components. Al- cle’s traction capabilities. Do not exceed 5 mph (8 ways inspect your vehicle’s fluids (i.e., engine oil, km/h) when driving through standing water.
Page 353: Tire Safety Information
STARTING AND OPERATING 351 • European-Metric tire sizing is based on European TIRE SAFETY INFORMATION design standards. Tires designed to this standard have Tire Markings the tire size molded into the sidewall beginning with the section width. The letter P is absent from this tire size designation.
Page 354 352 STARTING AND OPERATING Tire Sizing Chart Tire Sizing Chart Passenger Car tire size based on U.S. design standards ..blank..Passenger Car tire based on European design standards Light Truck tire based on U.S. design standards Temporary spare tire Overall diameter in inches (in) Section width in millimeters (mm) Aspect Ratio of section height to section width of tire, written in percent (%) 10.5...
Page 355 STARTING AND OPERATING 353 Tire Sizing Chart A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.e., tire pressure, vehicle loading, road conditions, and posted speed limits) ..blank..
Page 356 354 STARTING AND OPERATING Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 357: Tire Loading And Tire Pressure
STARTING AND OPERATING 355 Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side B-Pillar. Tire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry...
Page 358 356 STARTING AND OPERATING Loading combined weight of occupants, cargo/luggage and The vehicle maximum load on the tire must not exceed trailer tongue weight (if applicable) should never exceed the load carrying capacity of the tire on your vehicle. You the weight referenced here.
Page 359 STARTING AND OPERATING 357 amount of available cargo and luggage load capacity is NOTE: The following table shows examples on how to 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 calculate total load, cargo/luggage, and towing capaci- lbs [295 kg]).
Page 360 358 STARTING AND OPERATING...
Page 361: Tires - General Information
STARTING AND OPERATING 359 1. Safety— WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and •Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause accidents. recommended load capacity for your vehicle.
Page 362 360 STARTING AND OPERATING 3. Ride Comfort and Vehicle Stability— WARNING! Proper tire inflation contributes to a comfortable ride. Over-inflation produces a jarring and uncomfortable ride. •Unequal tire pressures can cause steering problems. You could lose control of your vehicle. Tire Inflation Pressures The proper cold tire inflation pressure is listed either on the •Unequal tire pressures from one side of the vehicle...
Page 363 STARTING AND OPERATING 361 The pressure should be checked and adjusted as well as inflation pressure must not exceed the maximum infla- inspecting for signs of tire wear or visible damage at least tion pressure molded into the tire sidewall. once a month.
Page 364 362 STARTING AND OPERATING Tire Pressures for High-Speed Operation Radial-Ply Tires The manufacturer advocates driving at safe speeds WARNING! within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high Combining radial ply tires with other types of tires speeds, maintaining correct tire inflation pressure is very on your vehicle will cause your vehicle to handle important.
Page 365 STARTING AND OPERATING 363 vehicle only. Since this tire has limited tread life, the DO NOT install a wheel cover or attempt to mount a original tire should be repaired (or replaced) and rein- conventional tire on the compact spare wheel, since the stalled at the first opportunity.
Page 366 364 STARTING AND OPERATING Limited-Use Spare Tire — If Equipped WARNING! The limited-use spare tire is for temporary emergency use on your vehicle. This tire is identified by a limited- • The limited use spare tire is for emergency use use spare tire warning label located on the limited use only.
Page 367 STARTING AND OPERATING 365 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, DO Tread wear indicators are in the original equipment tires to NOT spin your vehicle’s wheels faster than 30 mph (48 help you in determining when your tires should be replaced. km/h) or continuously for longer than 30 seconds with- out stopping when you are stuck.
Page 368 366 STARTING AND OPERATING Many states have laws requiring tire replacement at this Keep dismounted tires in a cool, dry place with as little point. exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Tire Life The service life of a tire is dependent upon varying Replacement Tires factors including but not limited to:...
Page 369 STARTING AND OPERATING 367 WARNING! CAUTION! • Replacing original tires with tires of a different size DO NOT use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of un- may result in false speedometer and odometer approved tires and wheels may change suspension readings.
Page 370: Tire Chains
368 STARTING AND OPERATING Improper alignment will not cause vehicle vibration. CAUTION! Vibration may be a result of tire and wheel out-of- balance. Proper balancing will reduce vibration and To avoid damage to your vehicle or tires, observe the following precautions: avoid tire cupping and spotty wear.
Page 371: Snow Tires
STARTING AND OPERATING 369 Always use the lower suggested operating speed if both TIRE ROTATION the chain manufacturer and vehicle manufacture suggest Tires on the front and rear axles of vehicles operate at a maximum speed. This notice applies to all chain different loads and perform different steering, driving, traction devices, including link and cable (radial) chains.
Page 372: Tire Pressure Monitor System (Tpms)
370 STARTING AND OPERATING The suggested rotation method is the “forward-cross” decrease. Tire pressure should always be set based on shown in the following diagram. cold inflation tire pressure. This is defined as the tire pressure after a vehicle has not been driven for more than three hours - and in outside ambient temperature.
Page 373 STARTING AND OPERATING 371 increased to the recommended cold tire placard pressure TPMS Warning Light will turn off only after the tires in order for the TPMS warning lamp to be turned off. The have been inflated to the vehicle’s recommended cold tire system will automatically update and the TPMS warning pressure value.
Page 374: Basic Tpms Without Evic - If Equipped
372 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- CAUTION! nance, and it is the driver’s responsibility to maintain correct tire pressure, using an accurate tire pressure After inspecting or adjusting the tire pressure always gage, even if under-inflation has not reached the level reinstall the valve stem cap.
Page 375 STARTING AND OPERATING 373 The Basic TPMS consists of the following components: NOTE: The vehicle may need to be driven for up to 10 minutes above 15 mph (25 km/h) to receive this infor- • Receiver Module mation. • Four Wheel Sensors The TPMS Warning Lamp will flash on and off for 75 •...
Page 376: Premium Tpms With Evic - If Equipped
374 STARTING AND OPERATING 3. Accumulation of excessive snow and/or ice around 4. For each subsequent ignition key cycle, a chime will the wheels or wheel housings. sound and the TPMS Telltale Warning Light will remain on solid. 4. Using tire chains on the vehicle. 5.
Page 377: Tpms Low Pressure Warnings
STARTING AND OPERATING 375 NOTE: It is particularly important to regularly check pressures are low. In addition, the EVIC will display one and maintain proper tire pressure in all the tires. or more Low Pressure messages (Left Front, Left Rear, Right Front, Right Rear) for three seconds, and a graphic The Premium TPMS consists of the following compo- display of the pressure value(s) with the low tire(s)
Page 378: Check Tpms Message
376 STARTING AND OPERATING Should a low tire condition occur on any of the four active road tire(s), you should stop as soon as possible, and inflate the low tire(s) that is flashing on the graphic display to the vehicle’s recommended cold tire pressure value.
Page 379 STARTING AND OPERATING 377 will not be present, and a pressure value will be dis- 2. If you install the compact spare tire in place of a road played instead of dashes. A system fault can occur by any tire that has a pressure below the low-pressure warning of the following scenarios: limit, upon the next ignition key cycle, the TPMS Telltale Warning Light will remain on, a chime will sound, and...
Page 380 378 STARTING AND OPERATING 5. Once you repair or replace the original road tire, and General Information reinstall it on the vehicle in place of the compact spare, This device complies with Part 15 of the FCC rules and the TPMS will update automatically. In addition, the RSS 210 of Industry Canada.
Page 381: Fuel Requirements
STARTING AND OPERATING 379 FUEL REQUIREMENTS using high-quality unleaded gasoline having an octane range of 87 to 89. The manufacturer recommends the use 3.3L & 3.8L Gasoline Engine of 89 octane for optimum performance. The use of All engines are designed to meet all emis- premium gasoline is not recommended.
Page 382 380 STARTING AND OPERATING Over 40 automobile manufacturers around the world Gasoline/Oxygenate Blends have issued and endorsed consistent gasoline specifica- Some fuel suppliers blend unleaded gasoline with oxy- tions (the World Wide Fuel Charter, WWFC) to define genates such as 10% ethanol, MTBE, and ETBE. Oxygen- fuel properties necessary to deliver enhanced emissions, ates are required in some areas of the country during the engine performance, and durability for your vehicle.
Page 383 STARTING AND OPERATING 381 manufacturer. While MTBE is an oxygenate made from It is even more important to look for gasolines without Methanol, it does not have the negative effects of Metha- MMT in Canada, because MMT can be used at levels nol.
Page 384 382 STARTING AND OPERATING Fuel System Cautions some light smoke, your engine may be out of tune or malfunctioning and may require immediate service. CAUTION! Contact your authorized dealer for service assistance. • The use of fuel additives which are now being sold as Follow these guidelines to maintain your vehicle’s octane enhancers is not recommended.
Page 385: Adding Fuel
STARTING AND OPERATING 383 Carbon Monoxide Warnings ADDING FUEL Fuel Filler Cap (Gas Cap) WARNING! As a reminder, a fuel icon with an arrow indicating which side of the vehicle the fuel Carbon monoxide (CO) in exhaust gases is deadly. filler door is located on, is located in the •...
Page 386 384 STARTING AND OPERATING NOTE: When the fuel nozzle “clicks” or shuts off, the CAUTION! fuel tank is full. Damage to the fuel system or emission control sys- WARNING! tem could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let •...
Page 387: Loose Fuel Filler Cap Message
STARTING AND OPERATING 385 NOTE: Loose Fuel Filler Cap Message • Tighten the fuel filler cap until you hear a “clicking” • If the gASCAP message is displayed in the instrument sound. This is an indication that the fuel filler cap is cluster, this signifies a leak or change in the evapora- properly tightened.
Page 388: Flexible Fuel - 3.3L Engines Only
386 STARTING AND OPERATING FLEXIBLE FUEL — 3.3L ENGINES ONLY E-85 General Information The information in this section is for Flexible Fuel Ve- hicles (FFV) only. These vehicles can be identified by the unique fuel filler door label that states: Ethanol (E-85) or Unleaded Gasoline Only.
Page 389: Ethanol Fuel (E-85)
STARTING AND OPERATING 387 ETHANOL FUEL (E-85) CAUTION! E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. Only vehicles with the E-85 Decal and/or fuel filler door label can operate on E-85. WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury.
Page 390: Selection Of Engine Oil For Flexible Fuel
388 STARTING AND OPERATING For best results, a refueling pattern that alternates be- Selection Of Engine Oil For Flexible Fuel Vehicles tween E-85 and unleaded gasoline should be avoided. (FFV) E-85 and Gasoline Vehicles When you do switch fuels, it is recommended that: FFV vehicles operated on E85 require specially formu- lated engine oils.
Page 391: Cruising Range
STARTING AND OPERATING 389 increase in the time it takes for your engine to start, and CAUTION! a deterioration in driveability (sags and/or hesitations) until the engine is fully warmed up. Replacing fuel system components with non-ethanol compatible components can damage your vehicle. Cruising Range Because E-85 fuel contains less energy per gallon than gasoline, you will experience an increase in fuel con-...
Page 392: Vehicle Loading
390 STARTING AND OPERATING VEHICLE LOADING Vehicle Certification Label As required by National Highway Traffic Safety Admin- Your vehicle has a Vehicle Certification Label attached to istration Regulations, your vehicle has a certification the driver’s door pillar. label affixed to the driver’s side door or pillar. The label contains the following information: •...
Page 393 STARTING AND OPERATING 391 Gross Vehicle Weight Rating (GVWR) Tire Size The GVWR is the total allowable weight of your vehicle. The tire size on the Vehicle Certification Label represents This includes driver, passengers, and cargo. The total the actual tire size on your vehicle. Replacement tires load must be limited so that you do not exceed the must be equal to the load capacity of this tire size.
Page 394 392 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle by axle and side by side. Store heavier items service as long as you do not exceed the GVWR and front down low and be sure you distribute their weight as and rear GAWR.
Page 395 STARTING AND OPERATING 393 CAUTION! Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR. If you do, parts on your vehicle can break, or it can change the way your vehicle handles. This could cause you to lose control.
Page 396: Trailer Towing
394 STARTING AND OPERATING A loaded vehicle is shown in the above table. Note that Common Towing Definitions neither the GVWR nor the GAWR capacities have been The following trailer towing-related definitions will as- exceeded. sist you in understanding the following information: NOTE: Refer to the “Vehicle Certification Label”...
Page 397 STARTING AND OPERATING 395 Gross Combination Weight Rating (GCWR) Trailer Tongue Weight (TW) The gross combination weight rating (GCWR) is the total The downward force exerted on the hitch ball by the permissible weight of your vehicle and trailer when trailer.
Page 398 396 STARTING AND OPERATING hitch is the most popular on the market today and is WARNING! commonly used to tow small- and medium-sized trailers. An improperly adjusted Weight Distributing Hitch Weight-Distributing Hitch system may reduce handling, stability, braking per- A weight-distributing system works by applying lever- formance, and could result in an accident.
Page 399 STARTING AND OPERATING 397 Weight Distributing Hitch System Improper Adjustment of Weight Distributing System...
Page 400 398 STARTING AND OPERATING Trailer Hitch Classifications Trailer Hitch Classification Definitions Your vehicle may be factory-equipped for safe towing of Class Max. Trailer Hitch Industry trailers weighing over 2,000 lbs (907 kg) with the optional Standards Trailer Tow Prep Package. See an authorized dealer for Class I - Light Duty 2,000 lbs (907 kg) package content.
Page 401 STARTING AND OPERATING 399 Trailer Towing Weights (Maximum Trailer Weight Ratings) The Trailer Towing Weights Chart provides the maximum trailer weight ratings towable for a given drivetrain. GCWR (Gross Com- Engine/Transaxle Frontal Area Max. GTW (Gross Trailer Wt.) Max. Tongue Wt. bined Wt.
Page 402 400 STARTING AND OPERATING Trailer and Trailer Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 403 STARTING AND OPERATING 401 Consider the following items when computing the Towing Requirements weight on the rear axle of the vehicle: To promote proper break-in of your new vehicle driv- etrain components, the following guidelines are recom- • Trailer tongue weight mended: •...
Page 404 402 STARTING AND OPERATING • Safety chains must always be used between your WARNING! vehicle and trailer. Always connect the chains to the frame or hook retainers of the vehicle hitch. Cross the Improper towing can lead to an injury accident. chains under the trailer tongue and allow enough Follow these guidelines to make your trailer towing slack for turning corners.
Page 405 STARTING AND OPERATING 403 • When replacing tires refer to the Tires–General Infor- 4. Trailer tongue weight rating for that trailer hitch. (This requirement may limit the ability to always mation section of this manual on Replacement Tires achieve the 10% to 15% range of trailer tongue weight for proper tire replacement procedures.
Page 406 404 STARTING AND OPERATING Towing Requirements — Trailer Lights and Wiring CAUTION! Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for If the trailer weighs more than 1,000 lbs (454 kg) motoring safety.
Page 407: Towing Tips
STARTING AND OPERATING 405 Four-Pin Connector Seven-Pin Connector Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away from heavy traffic.
Page 408 406 STARTING AND OPERATING Towing Tips — Automatic Transmission NOTE: • Check the automatic transmission fluid level before The DRIVE gear can be selected when towing. However, if frequent shifting occurs while in DRIVE, move the gear towing. selector lever into third gear (with four-speed transmis- •...
Page 409: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 407 Towing Tips — Cooling System RECREATIONAL TOWING (BEHIND To reduce potential for engine and transmission over- MOTORHOME, ETC.) heating, take the following actions: CAUTION! • City Driving When stopped for short periods of time, put transmission Towing this vehicle behind another vehicle (flat- gear selector lever in NEUTRAL but do not increase towing with all four wheels on the ground) IS NOT...
Page 411: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....410 Jump-Starting Procedure ....424 If Your Engine Overheats .
Page 412: Hazard Warning Flasher
410 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHER NOTE: With extended use, the Hazard Warning Flash- The hazard flasher switch is located in the center of ers may wear down your battery. the instrument panel below the radio. IF YOUR ENGINE OVERHEATS To engage the Hazard Warning Flashers, depress the In any of the following situations, you can reduce the switch on the instrument panel.
Page 413 WHAT TO DO IN EMERGENCIES 411 the fan control to High. This allows the heater core to act WARNING! as a supplement to the radiator and aids in removing heat from the engine cooling system. A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling CAUTION! coolant.
Page 414: Jacking And Tire Changing
412 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING WARNING! WARNING! For vehicles equipped with Stow ’n Go seating, if it is necessary to retrieve the spare tire from under the • Getting under a jacked-up vehicle is dangerous. vehicle on the side of the vehicle close to moving The vehicle could slip off the jack and fall on you.
Page 415 WHAT TO DO IN EMERGENCIES 413 Spare Tire Removal For vehicles equipped with Stow ’n Go seating, the spare tire is stowed inside a protective cover located under the center of the vehicle by means of a cable winch mecha- nism.
Page 416 414 WHAT TO DO IN EMERGENCIES Preparations For Jacking Park the vehicle on a firm level surface, avoid ice or slippery areas, set the parking brake and place the gear selector in PARK. Turn OFF the ignition. • Turn on the Hazard Warning Flasher. •...
Page 417 WHAT TO DO IN EMERGENCIES 415 Jacking Instructions WARNING! Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: • Always park on a firm, level surface as far from Jack Warning Label the edge of the roadway as possible before raising the vehicle.
Page 418 416 WHAT TO DO IN EMERGENCIES 1. Loosen (but do not remove) the wheel lug nuts by WARNING! turning them to the left one turn while the wheel is still on the ground. Carefully follow these tire changing warnings to help prevent personal injury or damage to your vehicle: 2.
Page 419 WHAT TO DO IN EMERGENCIES 417 3. Assemble the winch handle extensions to form the NOTE: If either front tire is flat, it may be necessary to Spare Tire Hook and pull the compact spare tire/cover jack up the vehicle to remove the compact spare tire/ assembly from under the vehicle.
Page 420 418 WHAT TO DO IN EMERGENCIES 4. When the compact spare tire/cover assembly is clear 5. There are two jack engagement locations on each side of the vehicle, stand the tire/cover assembly upright and of the vehicle body. These locations are on the sill flange remove the wheel spacer by squeezing the two retaining of the vehicle body.
Page 421 WHAT TO DO IN EMERGENCIES 419 Jack Location...
Page 422 420 WHAT TO DO IN EMERGENCIES CAUTION! WARNING! Do not attempt to raise the vehicle by jacking on Raising the vehicle higher than necessary can make locations other than those indicated in Step 5. the vehicle less stable. It could slip off the jack and hurt someone near it.
Page 423 WHAT TO DO IN EMERGENCIES 421 10. Lower the vehicle by turning the jack screw to the 13. Place the deflated (flat) tire and compact spare tire left. cover assembly in the rear cargo area. Do not stow the deflated tire in the spare tire location. Have the full 11.
Page 424 422 WHAT TO DO IN EMERGENCIES of operation, and after each time a tire is changed, to WARNING! allow the wheel nuts to become properly set. All nuts should first be firmly seated against the wheel. The nuts A loose compact spare tire/cover assembly, thrown should then be tightened to recommended torque.
Page 425 WHAT TO DO IN EMERGENCIES 423 2. Assemble the winch handle extensions to form the WARNING! Spare Tire Hook and pull the wheel spacer from under the vehicle. Verify that ’both’ retainer tabs of the wheel spacer have been properly extended through the center of 3.
Page 426: Jump-Starting Procedure
424 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURE CAUTION! WARNING! For vehicles equipped with Stow ’n Go seating, the • DO NOT attempt to push or tow the vehicle to get it started. Vehicles Winch Mechanism is designed specifically to stow a equipped with an automatic transmission cannot be started this way.
Page 427 WHAT TO DO IN EMERGENCIES 425 When jump-starting, proceed as follows: WARNING! 1. Wear eye protection and remove any metal jewelry DO NOT permit vehicles to touch each other as this such as watch bands or bracelets that might make an could establish a ground connection and personal inadvertent electrical contact.
Page 428: Freeing A Stuck Vehicle
426 WHAT TO DO IN EMERGENCIES 6. Start the engine in the vehicle which has the booster FREEING A STUCK VEHICLE battery, let the engine idle a few minutes, then start the If your vehicle becomes stuck in mud, sand or snow, it engine in the vehicle with the discharged battery.
Page 429: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 427 CAUTION! CAUTION! • Do not attempt to tow this vehicle from the front Racing the engine or spinning the wheels too fast may lead to transmission overheating and failure. It with sling type towing equipment. Damage to the can also damage the tires.
Page 430 428 WHAT TO DO IN EMERGENCIES Towing Without The Ignition Key CAUTION! Special care must be taken when the vehicle is towed with the ignition in the LOCK position. The only ap- • Do not push or tow this vehicle with another proved method of towing with out the ignition key is vehicle as damage to the bumper fascia and trans- with a flat bed truck.
Page 431: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS 3.3L Engine Compartment ....432 Maintenance Procedures ....439 3.8L Engine Compartment .
Page 432 430 MAINTAINING YOUR VEHICLE Power Steering — Fluid Check ... . 451 Appearance Care And Protection From Corrosion ..... . 465 Front Suspension —...
Page 433 MAINTAINING YOUR VEHICLE 431 Fog Lights ......483 Fluids And Capacities ....486 Rear Tail, Stop, Turn Signal, Side Marker Fluids, Lubricants And Genuine Parts .
Page 434: 3.3L Engine Compartment
432 MAINTAINING YOUR VEHICLE 3.3L ENGINE COMPARTMENT...
Page 435: L Engine Compartment
MAINTAINING YOUR VEHICLE 433 3.8L ENGINE COMPARTMENT...
Page 436: 4.0L Engine Compartment
434 MAINTAINING YOUR VEHICLE 4.0L ENGINE COMPARTMENT...
Page 437: Onboard Diagnostic System - Obd Ii
MAINTAINING YOUR VEHICLE 435 ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors • Prolonged driving with the “Malfunction Indica- the performance of the emissions, engine, and automatic tor Light”...
Page 438: Loose Fuel Filler Cap Message - Gascap
436 MAINTAINING YOUR VEHICLE Loose Fuel Filler Cap Message — gASCAP EMISSIONS INSPECTION AND MAINTENANCE Should the “Loose Fuel Filler Cap” or “gASCAP” mes- PROGRAMS sage appear, there may be a problem in the evaporative In some localities, it may be a legal requirement to pass system.
Page 439 MAINTAINING YOUR VEHICLE 437 This vehicle has a simple ignition key-actuated test, the ignition key or start the engine. This means that the which you can use prior to going to the test station. To vehicle’s OBD II system is not ready and you should check if this vehicle’s OBD II system is ready, you must not proceed to the I/M station.
Page 440: Replacement Parts
438 MAINTAINING YOUR VEHICLE serviced before going to the I/M station. The I/M station NOTE: Intentional tampering with emissions control can fail the vehicle because the MIL is on with the engine systems can result in civil penalties being assessed running.
Page 441: Maintenance Procedures
MAINTAINING YOUR VEHICLE 439 MAINTENANCE PROCEDURES ENGINE OIL The pages that follow contain the required maintenance Checking Oil Level services determined by the engineers who designed your To assure proper engine lubrication, the engine oil must vehicle. be maintained at the correct level. Check the oil level at Besides the maintenance items for which there are fixed regular intervals, such as every fuel stop.
Page 442 440 MAINTAINING YOUR VEHICLE Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Schedule” in Section 8 of this manual for information on this system. NOTE: Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months,...
Page 443 MAINTAINING YOUR VEHICLE 441 American Petroleum Institute (API) Engine Oil For information on engine oil filler cap location, refer to Identification Symbol the Engine Compartment illustration in this section. This symbol means that the oil has Lubricants which do not have both, the engine oil certi- been certified by the American fication mark and the correct SAE viscosity grade num- Petroleum Institute (API).
Page 444: Engine Oil Filter
442 MAINTAINING YOUR VEHICLE Synthetic Engine Oils station, or governmental agency for advice on how and You may use synthetic engine oils provided the recom- where used oil and oil filters can be safely discarded in mended oil quality requirements are met, and the recom- your area.
Page 445: Drive Belt
MAINTAINING YOUR VEHICLE 443 DRIVE BELT ENGINE AIR CLEANER At the mileage indicated in the maintenance schedule, Refer to the “Maintenance Schedule” in Section 8 of this replace the drive belt with a new drive belt. manual for engine air cleaner filter maintenance inter- vals.
Page 446: Catalytic Converter
444 MAINTAINING YOUR VEHICLE CATALYTIC CONVERTER CAUTION! The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the Damage to the catalytic converter can result if your catalyst as an emission control device. vehicle is not kept in proper operating condition.
Page 447 MAINTAINING YOUR VEHICLE 445 To minimize the possibility of catalyst damage: WARNING! • Do not shut off the engine or interrupt the ignition A hot exhaust system can start a fire if you park over when the transaxle is in gear and the vehicle is in materials that can burn.
Page 448: Maintenance-Free Battery
446 MAINTAINING YOUR VEHICLE Exhaust System WARNING! The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust Exhaust gases can injure or kill. They contain carbon system. monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can Whenever a change is noticed in the sound of the exhaust eventually poison you.
Page 449 MAINTAINING YOUR VEHICLE 447 WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Don’t allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin or clothing.
Page 450: Air Conditioner Maintenance
448 MAINTAINING YOUR VEHICLE AIR CONDITIONER MAINTENANCE WARNING! For best possible performance, your air conditioner should be checked and serviced by an authorized dealer • Use only refrigerants and compressor lubricants at the start of each warm season. This service should approved by the manufacturer for your air condi- include cleaning of the condenser fins and a system tioning system.
Page 451 MAINTAINING YOUR VEHICLE 449 Refrigerant Recovery And Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluoro- carbon (HFC) that is endorsed by the Environmental Do not remove the A/C Air Filter while the blower is Protection Agency and is an ozone-saving product. How- operating or personal injury may result.
Page 452 450 MAINTAINING YOUR VEHICLE 4. Disengage the two retaining tabs that secure the filter 6. Install the A/C Air Filter with the arrow on the filter cover to the HVAC housing and remove the cover. pointing toward the floor. When installing the filter cover, make sure the retaining tabs fully engage the cover.
Page 453: Power Steering - Fluid Check
MAINTAINING YOUR VEHICLE 451 POWER STEERING — FLUID CHECK If necessary, add fluid to restore to the proper indicated Checking the power steering fluid level at a defined level. With a clean cloth, wipe any spilled fluid from all service interval is not required. The fluid should only be surfaces.
Page 454: Drive Shaft Universal Joints
452 MAINTAINING YOUR VEHICLE DRIVE SHAFT UNIVERSAL JOINTS lubricating excess oil and grease should be removed. Your vehicle has constant velocity universal joints. Peri- Particular attention should also be given to hood latching odic lubrication of these joints is not required. However, components to ensure proper function.
Page 455 MAINTAINING YOUR VEHICLE 453 Avoid using the wiper blades to remove frost or ice from WARNING! the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care Windshield and Rear Window Washers must be exercised when filling or working around The fluid reservoir for the windshield washers and the...
Page 456: Cooling System
454 MAINTAINING YOUR VEHICLE COOLING SYSTEM Coolant Checks Check the engine coolant (antifreeze) protection every 12 WARNING! months (before the onset of freezing weather, where applicable). If coolant is dirty or rusty in appearance, the • When working near the radiator cooling fan, dis- system should be drained, flushed and refilled with fresh connect the fan motor lead or turn the ignition coolant.
Page 457 MAINTAINING YOUR VEHICLE 455 drain from the coolant recovery bottle. DO NOT RE- CAUTION! MOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT. Mixing of coolants other than specified Hybrid Or- ganic Additive Technology (HOAT) engine coolants, Cooling System — Drain, Flush and Refill may result in engine damage and may decrease The system should be drained, flushed, and refilled at the corrosion protection.
Page 458 456 MAINTAINING YOUR VEHICLE Adding Coolant The use of lower quality water will reduce the amount of Your vehicle has been built with an improved engine corrosion protection in the engine cooling system. coolant that allows extended maintenance intervals. This Please note that it is the owner’s responsibility to main- coolant can be used up to five years or 102,000 mi (170 tain the proper level of protection against freezing ac-...
Page 459 MAINTAINING YOUR VEHICLE 457 community. To prevent ingestion by animals or children WARNING! do not store ethylene glycol-based engine coolant in open containers or allow it to remain in puddles on the • The warning words “DO NOT OPEN HOT” on ground.
Page 460 458 MAINTAINING YOUR VEHICLE • Check coolant freeze point in the radiator and in the When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do coolant recovery bottle. If antifreeze needs to be not overfill.
Page 461: Hoses And Vacuum/Vapor Harnesses
MAINTAINING YOUR VEHICLE 459 • Do not change the thermostat for summer or winter Inspect all hose connections such as clamps and cou- operation. If replacement is ever necessary, install plings to make sure they are secure and no leaks are ONLY the correct type thermostat.
Page 462: Brakes
460 MAINTAINING YOUR VEHICLE cracking, tears, cuts, abrasion, and excessive swelling BRAKES In order to assure brake system performance, all brake indicate deterioration of the rubber. Particular attention system components should be inspected periodically. should be made to examining those hose surfaces nearest Suggested service intervals can be found in the Mainte- to high heat sources, such as the exhaust manifold.
Page 463 MAINTAINING YOUR VEHICLE 461 NOTE: Inspection of brake hoses should be performed Clean the top of the master cylinder area before removing whenever the brake system is serviced and every engine the cap. Add fluid to bring the level up to the top of the oil change.
Page 464: Automatic Transaxle
462 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Overfilling the brake fluid reservoir can result in Do not allow petroleum base fluid to contaminate the spilling brake fluid on hot engine parts and the brake fluid — all brake seal components could be brake fluid catching fire.
Page 465 MAINTAINING YOUR VEHICLE 463 All six speed transaxles are equipped with a capped CAUTION! dipstick tube, it is sealed and should not be tampered with. Your authorized dealer has the necessary tools to Using a transaxle fluid other than the manufacturer’s ensure that the fluid level is set properly.
Page 466 464 MAINTAINING YOUR VEHICLE Fluid Level Check — 3.3L Engine with Four-Speed 4. Place the gear selector lever momentarily in each gear Automatic Transaxle — If Equipped position ending with the lever in PARK. Wipe the area The dipstick is located just behind the radiator, lower around the dipstick clean to eliminate the possibility of right side.
Page 467: Front And Rear Wheel Bearings
MAINTAINING YOUR VEHICLE 465 If the fluid level indicates low, add sufficient fluid to Special Additives bring to the proper level. Automatic Transmission Fluid (ATF) is an engineered product and its performance may be impaired by supple- CAUTION! mental additives. Therefore, do not add any fluid addi- tives to the transaxle.
Page 468 466 MAINTAINING YOUR VEHICLE • Insects, tree sap and tar trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle. Outside parking, • Salt in the air near seacoast localities which exposes your vehicle to airborne contaminants, •...
Page 469 MAINTAINING YOUR VEHICLE 467 • Avoid using abrasive compounds and power buffing • If you detect any stone chips or scratches in the paint, that may diminish the gloss or thin out the paint touch them up immediately. The cost of such repairs is finish.
Page 470 468 MAINTAINING YOUR VEHICLE Wheel and Wheel Trim Care use protectants or other products, which may cause All wheels and wheel trim, especially aluminum and undesirable reflections. Use soap and warm water to chrome-plated wheels should be cleaned regularly with a restore the low glare surface.
Page 471 MAINTAINING YOUR VEHICLE 469 • Blot any remaining stain with a clean, damp towel. soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- • For tough stains, apply Mopar Total Clean or a mild gents, or ammonia-based cleaners to clean your leather soap solution to a clean, damp cloth and remove stain.
Page 472 470 MAINTAINING YOUR VEHICLE 2. To maintain the high gloss shine, apply a scratch and Glass Surfaces swirl remover onto a damp cloth and apply to door All glass surfaces should be cleaned on a regular basis applique. Rub the applique with a firm pressure then buff with Mopar Glass Cleaner or any commercial lightly with a clean cotton cloth until a high gloss shine is...
Page 473: Cleaning The Instrument Panel Cup Holders
MAINTAINING YOUR VEHICLE 471 1. Clean with a wet soft rag. A mild soap solution may be Cleaning The Instrument Panel Cup Holders used, but do not use high alcohol content or abrasive Removal cleaners. If soap is used, wipe clean with a clean damp Pull the flexible liner from the cup holder drawer;...
Page 474: Fuses/Totally Integrated Power Module
472 MAINTAINING YOUR VEHICLE Installation Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer. FUSES/TOTALLY INTEGRATED POWER MODULE (TIPM) The Totally Integrated Power Module (TIPM) is located in the engine compartment near the battery.
Page 475 MAINTAINING YOUR VEHICLE 473 The numbers inside the TIPM cover correspond to the FUSES/TIPM following table. Cartridge Mini Cavity Description FUSES/TIPM Fuse Fuse Cartridge Mini 40 Amp — Power Memory Seat (If Cavity Description Green Equipped) Fuse Fuse 40 Amp —...
Page 476 474 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse 20 Amp — Powertrain Control Mod- — 20 Amp — Yellow ule (PCM) Trans Range Yellow 60 Amp — Radiator Fan — 10 Amp Trailer Tow Yellow...
Page 477 MAINTAINING YOUR VEHICLE 475 FUSES/TIPM FUSES/TIPM Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse — 20 Amp Ignition Off Draw — Ve- — 20 Amp Ignition Off Draw— Yellow hicle Entertainment Sys- Yellow Cabin Compartment Node tem (IOD-VES), Satellite (IOD-CCN), Wireless Con- Digital Audio Receiver...
Page 478 476 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse — 20 Amp COL MOD, IR SNS, — 10 Amp Occupant Restraint Yellow Heater Ventilation, Air Controller/Occupant Conditioning/Automatic Classification Module Temperature Control (ORC/OCM) (HVAC/ATC), Rear View —...
Page 479 MAINTAINING YOUR VEHICLE 477 FUSES/TIPM FUSES/TIPM Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse — 20 Amp Auto Shut Down (ASD — 10 Amp Ignition Switch (IGN SW), Yellow Window Module (WIN MOD) — 10 Amp Right Horn (RT HORN (HI/LOW) —...
Page 480 478 MAINTAINING YOUR VEHICLE FUSES/TIPM FUSES/TIPM Cartridge Mini Cartridge Mini Cavity Description Cavity Description Fuse Fuse Fuse Fuse — 10 Amp Occupant Restraint Con- — 10 Amp Anti-Lock Brake System troller (ORC), TT EU- (ABS), Electronic Stability ROPE Program (ESP), Stop Lamp Switch (STP LP —...
Page 481: Vehicle Storage
MAINTAINING YOUR VEHICLE 479 Amp circuit breaker located under the driver’s seat. The CAUTION! Power Windows are fused by a 25 Amp circuit breaker located under the instrument panel near the steering • When installing the Integrated Power Module cover, column.
Page 482: Replacement Light Bulbs
480 MAINTAINING YOUR VEHICLE REPLACEMENT LIGHT BULBS LIGHT BULBS — Exterior Bulb Number Backup, Tail, Stop Light ....3157 Center High-Mounted Stop Light . . . LED (See Note 1) LIGHT BULBS —...
Page 483: Bulb Replacement
MAINTAINING YOUR VEHICLE 481 BULB REPLACEMENT NOTE: On vehicles equipped with High Intensity Dis- charge Headlights (HID), when the headlights are turned High Intensity Discharge Headlights (HID) — If on, there is a blue hue to the lights. This diminishes and Equipped becomes more white after approximately 10 seconds, as The headlights are a type of high voltage discharge tube.
Page 484: Front Park/Turn Signal And Side Marker Lights
482 MAINTAINING YOUR VEHICLE Front Side Marker Lights CAUTION! 1. Raise the hood to access the rear of the headlight Do not touch the new bulb with your fingers. Oil housing. contamination will severely shorten bulb life. If the NOTE: Access is somewhat limited. You may have to bulb comes in contact with an oily surface, clean the remove the inner fender well or remove the headlight bulb with rubbing alcohol.
Page 485: Fog Lights
MAINTAINING YOUR VEHICLE 483 Fog Lights CAUTION! NOTE: Access to the fog light bulb is from the rear of Do not touch the new bulb with your fingers. Oil the fascia. On the left rear side of the fascia, remove the contamination will severely shorten bulb life.
Page 486: Rear Tail, Stop, Turn Signal, Side Marker And Backup Lights
484 MAINTAINING YOUR VEHICLE Rear Tail, Stop, Turn Signal, Side Marker and NOTE: • If a screwdriver is used, make sure a soft material is Backup Lights placed between the vehicle body and tool so not to 1. Raise the liftgate. scratch the paint.
Page 487: Center High-Mounted Stop Light (Chmsl)
MAINTAINING YOUR VEHICLE 485 3. Twist the socket and remove form the light assembly. License Light The light for the license plate light is located under the 4. Pull the bulb to remove it from the socket. tailgate light bar and above the license plate. 5.
Page 488: Fluids And Capacities
486 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES FLUIDS AND CAPACITIES U.S. Metric Fuel (approximate) All Engines 20 Gals 76 L Engine Oil with Filter 3.3L and 3.8L (SAE 5W-20 API Certified) 5.0 Qts 4.7 L 4.0L (SAE 10W-30 API Certified) 5.5 Qts 5.2 L Cooling System...
Page 489: Fluids, Lubricants And Genuine Parts
MAINTAINING YOUR VEHICLE 487 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine FLUIDS, LUBRICANTS AND GENUINE PARTS — ENGINE Component Fluids, Lubricants and Genuine Parts Coolant Mopar Antifreeze/Coolant Five Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Oil – 3.3L, 3.8L Use API Certified SAE 5W-20 engine oil.
Page 490: Chassis
488 MAINTAINING YOUR VEHICLE Chassis FLUIDS, LUBRICANTS AND GENUINE PARTS — CHASSIS Component Fluids, Lubricants and Genuine Parts Automatic Transmission Mopar ATF+4 Automatic Transmission Fluid Brake Master Cylinder Mopar DOT 3 and SAE J1703 should be used or equivalent. If DOT 3 brake fluid is not available, then DOT 4 is acceptable.
Page 491 MAINTENANCE SCHEDULES CONTENTS Emissions Control System Maintenance ..490 Required Maintenance Intervals ... 493 Maintenance Schedule ....490...
Page 492 490 MAINTENANCE SCHEDULES EMISSIONS CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULE The Scheduled Maintenance services listed in bold type, The oil change indicator system will remind you that it is must be done at the times or mileages specified to ensure time to take your vehicle in for scheduled maintenance. the continued proper functioning of the Emissions Con- On Non-EVIC equipped vehicles CHAngE OIL will flash trol System.
Page 493 MAINTENANCE SCHEDULES 491 NOTE: than your dealer, the message can be reset by referring to • The oil change indicator message will not monitor the the steps described under “Oil Change Required” in “Use time since the last oil change. Change your vehicle’s Factory Settings”...
Page 494 492 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals CAUTION! as required.
Page 495 MAINTENANCE SCHEDULES 493 Required Maintenance Intervals Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the engine oil and engine oil filter. 6,000 10 000 Rotate Tires. 6,000 10 000 If using your vehicle for any of the following: Dusty...
Page 496 494 MAINTENANCE SCHEDULES Perform Maintenance Every (Where time and mileage are listed, follow the interval that occurs first.) Maintenance Items Miles Kilometers or Months Change the automatic transmission fluid & filter if using your vehicle for any of the following: police, 60,000 100 000 taxi, fleet or frequent trailer towing.
Page 497 MAINTENANCE SCHEDULES 495 WARNING! You can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 499 Reporting Safety Defects ....503 Chrysler LLC Customer Center ... 500 In The 50 United States And Washington, D.C.
Page 500 498 IF YOU NEED CONSUMER ASSISTANCE Publication Order Forms ....504 Traction Grades ..... . 505 Department Of Transportation Uniform Tire Temperature Grades .
Page 501: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 499 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 502: Chrysler Llc Customer Center
Phone: (800) 992-1997 ship. They want to know if you need assistance. Chrysler Canada Inc. Customer Center • If an authorized dealership is unable to resolve the P.O. Box 1621 concern, you may contact the Manufacturer’s Cus- Windsor, Ontario N9A 4H6 tomer Center.
Page 503: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 501 In Mexico contact: Service Contract Av. Prolongacion Paseo de la Reforma, 1240 You may have purchased a service contract for an vehicle Sante Fe C.P. 05109 to help protect you from the high cost of unexpected Mexico, D.
Page 504: Warranty Information (U.s. Vehicles Only)
You’ll be pleased with their birth defects or other reproductive harm. sincere efforts to resolve any warranty issues or related concerns. WARRANTY INFORMATION (U.S. Vehicles Only) See the Warranty Information Booklet for the terms and provisions of Chrysler LLC warranties applicable to this vehicle.
Page 505: Mopar Parts
IF YOU NEED CONSUMER ASSISTANCE 503 MOPAR PARTS To contact NHTSA, you may either call the Auto Safety Mopar fluids, lubricants, parts, and accessories are Hotline toll free at 1–888–327–4236 (TTY: 1–800–424– 9153), available from an authorized dealer. They will help keep or go to http://www.safercar.gov;...
Page 506: Publication Order Forms
Chrysler LLC assistance of service and engineering specialists to vehicles. A complete working knowledge of the ve- acquaint you with specific Chrysler LLC vehicles. hicle, system, and/or components is written in Included are starting, operating, emergency and main-...
Page 507: Traction Grades
IF YOU NEED CONSUMER ASSISTANCE 505 Call toll free at: Treadwear The Treadwear grade is a comparative rating, based on • 1–800–890–4038 (U.S.) the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 508: Department Of Transportation Uniform Tire Temperature Grades
506 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 509 INDEX...
Page 510 508 INDEX Adding Engine Coolant (Antifreeze) ..456 Airbag Maintenance ..... . . 76 Adding Fuel .
Page 511 INDEX 509 Automatic Dimming Mirror ....100 Ball Joints ......451 Automatic Door Locks .
Page 512 510 INDEX Brakes ......339,460 CD (Compact Disc) Player ....282,285 Brake/Transmission Interlock .
Page 513 INDEX 511 Coin Holder ......200 Coolant Capacity ..... . 486 Cold Weather Operation .
Page 514 512 INDEX Digital Video Disc (DVD) Player ..282,285 Through Flowing, Rising, or Shallow Dimmer Control ......160 Standing Water .
Page 515 INDEX 513 Emission Control System Maintenance ..436,490 Operation ......92 Engine .
Page 516 514 INDEX Flashers Brake ....... 461 Hazard Warning ..... . . 410 Power Steering .
Page 517 INDEX 515 Requirements ..... . 379,486 General Information ....18,27,131,378 System Hoses .
Page 518 516 INDEX Passing ......168 Infant Restraint ......81,82 Replacing .
Page 519 INDEX 517 Key, Sentry (Immobilizer) ....15 Back-Up ......484 Key-In Reminder .
Page 520 518 INDEX Interior ......159,160 Warning (Instrument Cluster Description) ..226 License .
Page 521 INDEX 519 Manual, Service ......504 Navigation Radio ......285 Map/Reading Lights .
Page 522 520 INDEX Synthetic ......442 Phone, Cellular ....104,285,286 Viscosity .
Page 523 INDEX 521 Power Steering Fluid ..... 488 Rearview Mirrors ......100 Pregnant Women and Seat Belts .
Page 524 522 INDEX Rotation, Tires ......369 Front Seat ......56 Pretensioners .
Page 525 INDEX 523 Sentry Key Programming ....17 Speedometer ......229 Sentry Key Replacement .
Page 526 524 INDEX Storing Your Vehicle ..... . 479 Tire Markings ......351 Stow n Go (Fold in Floor) Seats .
Page 527 INDEX 525 Replacement ......366 Trailer Towing ......394 Rotation .
Page 528 526 INDEX Transmitter, Remote Keyless Entry (RKE) ..21 Variance, Compass ....241,248 Transporting Pets ......88 Vehicle Certification Label .
Page 529 INDEX 527 Wheel and Wheel Trim ....468 Windshield Washers ....166,453 Wheel and Wheel Trim Care .
Page 530 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 531 81-026-0817 Third Edition Printed in U.S.A.

This manual is also suitable for:

Town & country 2008Town and country 20082008 town and country

Chrysler Town and Country Owner's Manual

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

What to Do in Emergencies

Maintaining Your Vehicle

Quick Links

Chapters

Related Manuals for Chrysler Town and Country

Summary of Contents for Chrysler Town and Country