Radios - Motorola WiNG 5 System Reference Manual

Secondary Next
Hop IP
Secondary Next
Hop State
Default Next Hop
IP
Default Next Hop
State
Refresh

13.3.9 Radios


Access Point Statistics
The Radio statistics screens display information on access point radios. The actual number of radios depend on the access
point model and type. This screen displays information on a per radio basis. Use this information to refine and optimize
the performance of each radio and therefore improve network performance.
The access point's radio statistics screens provide details about associated radios. It provides radio ID, radio type, RF
quality index etc. Use this information to assess the overall health of radio transmissions and access point placement. An
AP-7131 model access point can support from 1-3 radios depending on the SKU purchased. AP-6532 and AP-7161 model
access points are both dual radio models and AP-6511 and AP-6532 models are both single radio access points.
Each of these screens provide enough statistics to troubleshoot issues related to the following three areas:
• Status
• RF Statistics
• Traffic Statistics
Individual access point radios display as selectable links within each of the three access point radio screens. To review a
radio's configuration in greater detail, select the link within the Radio column of either the Status, RF Statistics or Traffic
Statistics screens.
If the primary hop is unavailable, a second resource is used. This column lists
the address set for the alternate route in the election process.
Displays whether the secondary hop is being applied to incoming routed
packets.
If a packet subjected to PBR does not have an explicit route to the destination,
the configured default next hop is used. This is either the IP address of the
next hop or the outgoing interface. Only one default next hop is available. The
difference between the next hop and the default next-hop is in case of former,
PBR occurs first, then destination based routing. In case of the latter, the order
is reverse.
Displays whether the default hop is being applied to incoming routed packets.
Select the Refresh button to update the screen's statistics counters to their
latest values.
Statistics 12 - 57