Motorola WiNG 5 System Reference Manual page 260

5 - 200 WiNG 5 Access Point System Reference Guide
7. Review the following parameters unique to each Virtual Interface configuration to determine whether a parameter
override is warranted:
Name
Type
Description
Admin Status
VLAN
IP Address
Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new interface
requires creation, or an existing Virtual Interface requires edit (override) or deletion.
8. Select Add
existing Virtual Interface or
Figure 5-111 Profile Overrides - Virtual Interfaces screen
Displays the name of each listed Virtual Interface assigned when it was
created. The name is between 1 - 4094, and cannot be modified as part of a
Virtual Interface edit.
Displays the type of Virtual Interface for each listed interface.
Displays the description defined for the Virtual Interface when it was either
initially created or edited.
A green checkmark defines the listed Virtual Interface configuration as active
and enabled with its supported profile. A red "X" defines the Virtual Interface
as currently disabled. The interface status can be modified when a new Virtual
Interface is created or an existing one modified.
Displays the numerical VLAN ID associated with each listed interface.
Defines whether DHCP was used to obtain the primary IP address used by the
Virtual Interface configuration.
to define a new Virtual Interface configuration,
Delete to permanently remove a selected Virtual Interface.
Edit to modify or override the configuration of an