Table of Contents
Advertisement
18.Set a
NAS-Identifier Attribute
typically identifies where a RADIUS message originates
19.Set a
NAS-Port-Id Attribute
the device port where a RADIUS message originates
20.Refer to the
Turn off LEDs
21.Select the
Capable
radio button within the RF Domain Manager field to designate this access point as capable of
being the RF Domain manager for other access points within the RF Domain. This setting is enabled by default. The RF
Domain Manager can support up to 24 access points of the same model. An AP-7131 or AP-6532 RF Domain Manager
can support up to 512 client connections. An AP-6511 or AP-6521 RF Domain Manager can support up to 256 client
connections.
22.Select the
Priority
radio button within the RF Domain Manager field to set this access point's priority (1 - 255) versus
other capable access points. The higher the value set the greater the likelihood of the access point being elected the
RF Domain manager during the election process.
23.Select
OK
to save the changes made to the profile's Advanced Miscellaneous configuration. Select
the last saved configuration.
Figure 5-163 Profile Overrides - Miscellaneous screen
up to 253 characters in length. This is the RADIUS NAS-Identifier attribute that
up to 253 characters in length. This is the RADIUS NAS port ID attribute which identifies
option to disable an adopted access point's LEDs. This feature is enabled by default.
Device Configuration 5 - 285
Reset
to revert to
Hide quick links:
Advertisement
Table of Contents
