Table of Contents
Advertisement
4. If adding a new administrator, enter the user name in the
exceed 32 characters. Optimally assign a name representative of the user's intended access type and role.
5. Provide a strong administrator password. Once provided,
a mandatory field.
6. Define protocol
Access
for the user's unique permissions. If required, all four options can be selected and invoked
simultaneously.
Web UI
Telnet
SSH
Console
7. Select an
Administrator
Superuser
System
Figure 10-2 Administrators screen
Select this option to enable access to the access point's Web UI.
Select this option to enable access to the access point using TELNET.
Select this option to enable access to the access point using SSH.
Select this option to enable access to the access point's console.
Role. Only one role can be assigned.
Select this option to assign complete administrative rights to this user. This
entails all the roles listed.
Select System to allow the administrator to configure general settings like
NTP, boot parameters, licenses, perform image upgrade, auto install,
manager redundancy/clustering and control access.
Management Access 10 - 3
User Name
field. This is a mandatory field, and cannot
Reconfirm
the password to ensure its accuracy. This is also
Hide quick links:
Advertisement
Table of Contents
