Motorola WiNG 5 System Reference Manual page 567

1. Refer to the following to determine whether a firmware image needs requires an update:
Device MAC
Firmware Version
Build Date
Install Date
Current Boot
Next Boot
Fallback
Upgrade Status
Figure 12-1 Device Details screen
Displays the factory assigned hardware MAC address (in the banner of the
screen) for the selected access point. The Device Type also displays in the
banner of the screen.
Displays the primary and secondary firmware image version currently
utilized by the selected access point.
Displays the date the primary and secondary firmware image was built for
the selected device.
Displays the date the firmware was installed on the access point
represented by the listed MAC address.
Lists whether the primary or secondary firmware image is to be applied the
next time the device boots.
Use the drop-down menu to select the Primary or Secondary image to boot
the next time the device reboots.
Lists whether fallback is currently enabled for the selected device. When
enabled, the device reverts back to the last successfully installed firmware
image if something were to happen in its next firmware upgrade that
would render the device inoperable.
Displays the status of the last firmware upgrade. For information on
upgrading device firmware, see Upgrading Device Firmware on page
Operations 12 - 3
12-5.