Ethernet Port Override Configuration - Motorola WiNG 5 System Reference Manual

5 - 192 WiNG 5 Access Point System Reference Guide

5.10.1.1 Ethernet Port Override Configuration


Profile Interface Override Configuration
Use an Ethernet Port override to change (modify) parameters of an access point's Ethernet Port configuration.
The following ports are available on supported access point models:
• AP-6511 - fe1, fe2, fe3, fe4, up1
• AP-7131 - GE1/POE (LAN), GE2 (WAN)
• AP-6532 -GE1/POE (LAN)
• AP-7161 - GE1/POE (LAN), GE2 (WAN)
• AP-6521 - GE1/POE (LAN)
To define an Ethernet port configuration override:
1. Select the
2. Select Devices
3. Select a target device (by double-clinking it) from amongst those displayed within the Device Configuration
screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of the UI.
4. Select Profile Overrides
5. Select Interface
6. Select Ethernet
Configuration tab from the Web UI.
from the Configuration tab.
from the Device menu to expand it into sub menu options.
to expand its sub menu options.
Ports.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.