Table of Contents
Advertisement
Figure 5-139 Profile Overrides - Network Forwarding Database screen
6. Define or override a
Bridge Aging Time
The aging time defines the length of time an entry will remain in the a bridge's forwarding table before being deleted
due to lack of activity. If an entry replenishments a destination generating continuous traffic, this timeout value will
never be invoked. However, if the destination becomes idle, the timeout value represents the length of time that must
be exceeded before an entry is deleted from the forwarding table. The default setting is 300 seconds.
7. Use the
+ Add Row
button to create a new row within the MAC address table.
8. Set or override a destination
decides to forward the packet or drop (filter) it. If it's determined the destination MAC is on a different network, it
forwards the packet to the segment. If the destination MAC is on the same network segment, the packet is dropped
(filtered).
9. Define or override the target
10. Provide an
Interface Name
11. Select
OK
to save the changes and overrides. Select
between 0, 10-1,000,000 seconds.
MAC Address
address. The bridge reads the packet's destination MAC address and
VLAN ID
if the destination MAC is on a different network segment.
used as the target destination interface for the target MAC address.
Reset
Device Configuration 5 - 251
to revert to the last saved configuration.
Hide quick links:
Advertisement
Table of Contents
