Motorola WiNG 5 System Reference Manual page 579

3. If necessary, enter a search string at the bottom of either the Available APs or Selected APs tables to search for a
target AP from amongst those access points in the representative table.
4. Select Tunnel Controller Name
selected AP(s).
NOTE: The election of new access point tunnel resources may terminate the client
connections of the selected access point(s). Ensure an impacted access point's client
support can be provided by neighboring peer access point, or risk the dropped
connections of these clients.
5. When you have completed a list of a Selected APs, select the
resources.
to enable a drop-down menu used to select a controller name that matches the
Re-elect
Operations 12 - 15
button to dedicate the selected APs as tunnel