Table of Contents
Advertisement
Interface Name
Packets per Second
9. Select
+ Add Row
as needed to add additional Storm Control configurations for other traffic types or interfaces.
Select the
Delete
icon as required to remove selected rows.
10.Refer to the
Storm Control Logging
Traffic Type
Logging
11.Select
+ Add Row
as needed to add additional Storm Control log entries for other interfaces. Select the
as required to remove selected rows.
12.Select
OK
to update the Storm Control settings. Select
policy can be invoked at any point in the configuration process by selecting
left-hand side, of the access point user interface.
13.Select the
Advanced Settings
Use the Advanced Settings tab to enable/disable the Firewall, define application layer gateway settings, flow timeout
configuration and TCP protocol checks.
Use the drop-down menu to refine the interface selection to a specific
WLAN or physical port. This helps with threshold configuration for
potentially impacted interfaces.
Select the check box to activate the spinner control used for specifying the
packets per second threshold for activating the Storm Control mechanism.
field to define how storm events are logged:
Use the drop-down menu to define the traffic type for which the Storm
Control logging configuration applies. Options include ARP, Broadcast,
Multicast and Unicast.
Select the check box to activate the spinner control used for specifying the
standard log level used if a Storm Control attack is detected. The default
log level is Warning.
tab.
Security Configuration
Reset
to revert to the last saved configuration.The Firewall
Activate Firewall Policy
8 - 9
Delete
icon
from the upper,
Hide quick links:
Advertisement
Table of Contents
