Motorola WiNG 5 System Reference Manual page 258

5 - 198 WiNG 5 Access Point System Reference Guide
Trust 8021p COS values
Trust IP DSCP
17. Select the
be used when authenticating users on this port.
18. Select OK
last saved configuration if you do not wish to commit the overrides.
Select the radio button to enable 802.1p COS values on this port. The default
value is enabled.
Select the radio button to enable IP DSCP values on this port. The default
value is enabled.
NOTE: Some vendor solutions with VRRP enabled send ARP packets with Ethernet SMAC
as a physical MAC and inner ARP SMAC as VRRP MAC. If this configuration is enabled, a
packet is allowed, despite a conflict existing.
Enable checkbox within the 802.1x Authentication field to enable a username and password pair to
to save the changes made to the Ethernet port's security configuration. Select Reset to revert to the