L2Tp V3 - Motorola WiNG 5 System Reference Manual

13.3.14 L2TP V3


Access Point Statistics
A WiNG supported access point uses L2TP V3 to create tunnels for transporting layer 2 frames. L2TP V3 enables an access
point to create tunnels for transporting Ethernet frames to and from bridge VLANs and physical ports. L2TP V3 tunnels can
be defined between WING devices and other devices supporting the L2TP V3 protocol.
To review a selected access point's PPPoE statistics:
1. Select the Statistics
2. Select System
access point for statistical observation.
3. Select L2TP V3.
4. The Access Point
Tunnel Name
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select an
Figure 13-47 Access Point - L2TP V3screen
L2TP V3 screen displays the following:
Displays the name of each listed L2TPv3 tunnel assigned upon creation. Each
listed tunnel name can be selected as a link to display session data specific
to that tunnel. The Sessions screen displays cookie size information as well
as psuedowire information specific to the selected tunnel. Data is also
available to define whether the tunnel is a trunk session and whether tagged
VLANs are used. The number of transmitted, received and dropped packets
also display to provide a throughput assessment of the tunnel connection.
Each listed session name can also be selected as a link to display VLAN
information specific to that session. The VLAN Details screen lists those
VLANs used an access point interface in L2TP tunnel establishment.
For information on creating new tunnel configuration, see
Configuration on page 5-53.
Statistics 12 - 89
L2TPv3 Profile