Graph - Motorola WiNG 5 System Reference Manual

13 - 154WiNG 5 Access Point System Reference Guide

13.4.6 Graph


Wireless Client Statistics
Use the Graph to assess a connected client's radio performance and diagnose radio performance issues that may be
negatively impacting performance. Up to three selected performance variables can be charted at one time. The graph
uses a Y-axis and a X-axis to associate selected.
To view a graph of this client's statistics:
1. Select the
2. Select System
an access point to display its connected client MAC addresses.
3. Select a client MAC address from those connected to the selected access point
4. Select Graph.
5. Use the Parameters
values.
6. Use the Polling Interval
1 minute, 5 minutes, 20 minutes or 1 hour. 30 seconds is the default value.
7. Select an available point in the graph to list the selected performance parameter, and display that parameter's
value and a time stamp of when it occurred.
Statistics menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and expand
drop down menu to define from 1- 3 variables assessing signal noise, transmit or receive
drop-down menu to define the interval the chart is updated. Options include 30 seconds,
Figure 13-81 Wireless Clients - Graph