Motorola WiNG 5 System Reference Manual page 568

12 - 4 WiNG 5 Access Point System Reference Guide
2. Refer to the drop-down menu on the lower, left-hand side, of the UI. The following tasks and displays are available
in respect to device firmware:
Show Running Config
Show Startup Config
Restart (factory default)
Halt
3. For information on conducting a device firmware upgrade, see
information on file transfers, see
Select this option to display the running configuration of the selected
device. The running configuration is displayed in a separate window.
Select Execute to perform the function.
Select this option to display the startup configuration of the selected
device. The startup configuration is displayed in a separate window.
Select Execute to perform the function.
Select this option to restart the selected device and apply the device's
factory default configuration. Selecting this option restarts the target
device, and sets its configurable parameters to their factory default
values. Consider exporting the device's current configuration to a secure
location for archive before reverting the device to its default configuration.
Select Execute to perform the function.
Select this option to stop the selected device. Select the Execute button to
perform the function.
Managing File Transfers on page
Upgrading Device Firmware on page
12-7.
12-5. For