Configuring A Radio's Qos Policy - Motorola WiNG 5 System Reference Manual

6.3.1 Configuring a Radio's QoS Policy


Radio QoS Policy
To configure an access point radio's QoS policy:
1. Select Configuration
2. Refer to the following information for a radio QoS policy:
Radio QoS Policy
Admission Control
for Firewall
Detected Traffic
(e.g., SIP)
Implicit TPSEC
> Wireless > Radio QoS Policy.
Figure 6-22 Radio QoS Policy screen
Displays the name of each Radio QoS policy. This is the name set for each
listed policy when it was created and cannot be modified as part of the
policy edit process.
A green checkmark defines the policy as applying radio QoS settings to
traffic detected by the Firewall used with the Radio QoS policy. A red "X"
defines the policy as having Firewall detection disabled. When enabled,
the Firewall simulates the reception of frames for voice traffic when voice
traffic was originated via SIP or SCCP control traffic. If a client exceeds
configured values, the call is stopped and/or received voice frames are
forwarded at the next non admission controlled traffic class priority. This
applies to clients that do not send TPSEC frames only.
A green checkmark defines the policy as requiring wireless clients to send
their traffic specifications to an access point before they can transmit or
receive data. If enabled, this setting applies to just this radio's QoS policy.
When enabled, the access point simulates the reception of frames for any
traffic class by looking at the amount of traffic the client is receiving and
sending. If a client sends more traffic than configured for an admission
controlled traffic class, the traffic is forwarded at the priority of the next
non admission controlled traffic class. This applies to clients that do not
send TPSEC frames only.
Wireless Configuration 6 - 63