Motorola WiNG 5 System Reference Manual page 88

5 - 28 WiNG 5 Access Point System Reference Guide
12. Refer to the
address firewall rules are required.
Use the Inbound IP Firewall Rules and Inbound MAC Firewall Rules drop-down menus to select firewall rules to
apply to this profile's port channel configuration.
The firewall inspects IP and MAC traffic flows and detects attacks typically not visible to traditional wired firewall
appliances.
If a firewall rule does not exist suiting the data protection needs of the target port channel configuration, select
the Create icon to define a new rule configuration or the Edit icon to modify an existing firewall rule configuration.
For more information, see
13. Refer to the
Trust ARP Responses
Trust DHCP Responses
ARP header Mismatch
Validation
Figure 5-14 Port Channels - Security screen
Access Control field. As part of the port channel's security configuration, Inbound IP and MAC
Wireless Firewall on page
Trust field to define the following:
Select the check box to enable ARP trust on this port channel. ARP packets
received on this port are considered trusted and information from these
packets is used to identify rogue devices within the managed network. The
default value is disabled.
Select the check box to enable DHCP trust. If enabled, only DHCP responses
are trusted and forwarded on this port channel, and a DHCP server can be
connected only to a DHCP trusted port. The default value is enabled.
Select the check box to enable a mismatch check for the source MAC in both
the ARP and Ethernet header. The default value is enabled.
8-2.