Motorola WiNG 5 System Reference Manual page 545

4. Set the following parameters required for
Enable SSHv2
SSHv2 Port
5. Set the following HTTP/HTTPS
Enable HTTP
Enable HTTPS
NOTE: If an AP-6511 or AP-6521's external RADIUS server is not reachable, HTTPS or
SSH management access to the access point may be denied. Those models (unlike
AP-7131, AP-6532 and AP-7161) do not have an onboard RADIUS resource and are reliant
on an external RADIUS resource for authentication.
6. Set the following FTP parameters:
Enable FTP
FTP Username
FTP Password
FTP Root Directory
7. Set the following General
Idle Session Timeout
Message of the Day
SSH access:
Select the checkbox to enable SSH device access. SSH (Secure Shell)
version 2, like Telnet, provides a command line interface to a remote host.
SSH transmissions are encrypted and authenticated, increasing the
security of transmission. SSH access is disabled by default.
Set the port on which SSH connections are made. The default port is 22.
Change this value using the spinner control or by entering the port number
in the field.
parameters:
Select the checkbox to enable HTTP device access. HTTP provides limited
authentication and no encryption.
Select the checkbox to enable HTTPS device access. HTTPS (Hypertext
Transfer Protocol Secure) is more secure than plain HTTP. HTTPS provides
both authentication and data encryption as opposed to just authentication
Select the checkbox to enable FTP device access. FTP (File Transfer
Protocol) is the standard protocol for transferring files over a TCP/IP
network. FTP requires administrators enter a valid username and
password authenticated locally on the controller. FTP access is disabled by
default.
Specify a username required when logging in to the FTP server. The
username cannot exceed 32 characters.
Specify a password required when logging in to the FTP server. Reconfirm
the password in the field provided to ensure it has been entered correctly.
The password cannot exceed 63 characters.
Provide the complete path to the root directory in the space provided. The
default setting has the root directory set to flash:/
parameters:
Specify an inactivity timeout for management connects (in seconds)
between 0 - 1,440. The default setting is 120.
Enter message of the day text to be displayed at login for clients
connecting via Telnet or SSH.
Management Access 10 - 7