Motorola WiNG 5 System Reference Manual page 79

11. Select OK to save the changes made to the Ethernet Port Basic Configuration. Select
configuration.
12. Select the Security tab.
13. Refer to the Access Control field. As part of the port's security configuration, Inbound IP and MAC address firewall
rules are required.
Use the Inbound IP Firewall Rules and Inbound MAC Firewall Rules drop-down menus to select the firewall rules to
apply to this profile's Ethernet port configuration.
The firewall inspects IP and MAC traffic flows and detects attacks typically not visible to traditional wired firewall
appliances.
14. If a firewall rule does not exist suiting the data protection needs of the target port configuration, select the
icon to define a new rule configuration.
15. Refer to the Trust field to define the following:
Trust ARP Responses
Figure 5-8 Ethernet Ports - Security screen
Select the radio button to enable ARP trust on this access point port. ARP
packets received on this port are considered trusted and information from
these packets is used to identify rogue devices within the network. The
default value is disabled.
Device Configuration 5 - 19
Reset to revert to the last saved
Create