Ospf Interface - Motorola WiNG 5 System Reference Manual

13.3.13.5 OSPF Interface


OSPF
An OSPF interface is the connection between a router and one of its attached networks. An interface has state information
associated with it, which is obtained from the underlying lower level protocols and the routing protocol itself. A network
interface has associated a single IP address and mask (unless the network is an unnumbered point-to-point network). An
interface is sometimes also referred to as a link.
To view OSPF interface statistics:
1. Select the Statistics
2. Select System
access point for statistical observation.
3. Select OSPF.
4. Select the OSPF Interface
5. The OSPF Interface tab describes the following:
Interface
Interface Index
Bandwidth
Interface Flag
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select an
tab.
Figure 13-45 Access Point OSPF - Interface tab
Displays the IP addresses and mask defined as the virtual interface for
dynamic OSPF routes. Zero config and DHCP can be used to generate route
addresses, or a primary and secondary address can be manually provided.
Lists the numerical index used for the OSPF interface. This interface ID is in
the hello packets establishing the OSPF network connection.
Lists the OSPF interface bandwidth (in Kbps) in the range of 1 - 10,000,000.
Displays the flag used to determine the interface status and how to proceed
Statistics 12 - 85