Motorola WiNG 5 System Reference Manual page 140

5 - 80 WiNG 5 Access Point System Reference Guide
29. Set the following
Priority
Cost
Bandwidth
30. Set the following
Chosen Authentication
Type
Authentication Key
31. Select the
used for an MD5 validation of authenticator credentials.
Use the spinner control to set the OSPF message digest authentication key ID. The available range is from 1 - 255.
The password is the OSPF key either displayed as series or asterisks or in plain text (by selecting Show).
Figure 5-41 OSPF Virtual Interface - Dynamic Routing screen
OSPF Settings:
Select this option to set the OSPF priority used to select the network
designated route. Use the spinner control to set the value from 1 - 255.
Select this option to set the cost of the OSPF interface. Use the spinner
control to set the value from 1 - 65,353.
Set the OSPF interface bandwidth (in Kbps) from 1 - 10,000,000.
OSPF Authentication
Select the authentication type used to validate credentials within the OSPF
dynamic route. Options include simple-password, message-digest, null and
None.
Enter and confirm the authentication key required by connecting nodes using
the OSPF dynamic route.
+ Add Row button (at the bottom of the
settings for the dynamic route:
MD5 Authentication table) to add the Key ID and Password