Controller Re-Election - Motorola WiNG 5 System Reference Manual

12 - 14 WiNG 5 Access Point System Reference Guide
Last Status
Clear History
Cancel

12.1.5 Controller Re-election


Device Operations
Available access points detected in the radio coverage area of an existing access point can be selected and added
into a list of resources available for tunnel establishment. Filtering neighboring access points for tunnel re-election
provides a means of customizing tunnel establishment in respect to the requirements of each tunnel session.'
For information on configuring an actual VPN tunnel that can be applied to an access point profile, see
VPN Settings on page
To set the election of preferred tunnel resources:
1. Select Operations
2. Refer to the
Use the >> button to move all the access points in the Available APs table to the Selected APs table. Use the >
button to move a selected access point in the Available APs table to the Selected APs table. Use the << button to
move all access points from the Selected APs List. Use the < button to move a selected access point from the
Selected APs List.
Displays the time of the last status update for access points that are no
longer upgrading.
Selecting the Clear History button clears the history log page for each
access point.
Clicking the Cancel button will cancel the upgrade process for any selected
access points that are upgrading.
5-93.
> Devices > AP Upgrade.
Figure 12-9 AP Upgrade screen - Re-elect Controller
Available APs table to review those detected access points available for tunnel re-election.
Defining Profile