Table of Contents
Advertisement
11.Set the following
General
Logging
Local PBR
Use CRM
12.Select
OK
to save the updates to the route-map general configuration. Select
configuration.
Figure 7-4 Policy Based Routing screen - General tab
PBR configuration settings:
Select this option to log events generated by route-map configuration rule
enforcement. This setting is disabled by default.
Select this option to implement policy based routing for this access point's
packet traffic. This setting is enabled by default, so the match and action
clauses defined within the Route Maps tab are implemented until disabled
using this setting.
Select the
Use CRM
(Critical Resource Management) option to monitor
access point link status. Selecting this option determines the disposition
of the route-map next hop via monitored critical resources. Link monitoring
is the function used to determine a potential failover to the secondary next
hop. This setting is enabled by default.
Network Configuration
Reset
to revert to the last saved
7 - 7
Hide quick links:
Advertisement
Table of Contents
