Motorola WiNG 5 System Reference Manual page 100

5 - 40 WiNG 5 Access Point System Reference Guide
21. Refer to the
aggregated by the access point radio.
A-MPDU Modes
Minimum Gap
Between Frames
Received Frame Size
Limit
Transmit Frame Size
Limit
22. Use the Aggregate MAC Service Data Unit (A-MSDU)
A-MSDU mode.
Figure 5-20 Access Point Radio - Advanced Settings tab
Aggregate MAC Protocol Data Unit (A-MPDU)
Use the drop-down menu to define the A-MPDU mode supported. Options
include Transmit Only, Receive Only, Transmit and Receive and None. The
default value is Transmit and Receive. Using the default value, long frames can
be both sent and received (up to 64 KB). When enabled, define either a
transmit or receive limit (or both).
Use the drop-down menu to define the minimum gap between A-MPDU frames
(in microseconds). The default value is 4 microseconds.
If a support mode is enable allowing A-MPDU frames to be received, define an
advertised maximum limit for received A-MPDU aggregated frames. Options
include 8191, 16383, 32767 or 65535 bytes. The default value is 65535 bytes.
Use the spinner control to set limit on transmitted A-MPDU aggregated
frames. The available range is between 0 - 65,535 bytes). The default value is
65535 bytes.
field to define how MAC service frames are
drop-down menu to set the supported