Motorola WiNG 5 System Reference Manual page 314

5 - 254 WiNG 5 Access Point System Reference Guide
Trust DHCP Responses
7. Select Add
configuration or
8. If adding a new Bridge VLAN configuration, use the spinner control to define or override a
4094. This value must be defined and saved before the General tab can become enabled and the remainder of the
settings defined. VLAN IDs 0 and 4095 are reserved and unavailable.
9. If creating a new Bridge VLAN, provide a
configuration to help differentiate it from other VLANs with similar configurations.
When DHCP trust is enabled, a green checkmark displays. When disabled, a
red "X" displays. When enabled, DHCP packets from a DHCP server are
considered trusted and permissible within the network. DHCP packets are
used to update the DHCP Snoop Table to prevent IP spoof attacks.
to define a new Bridge VLAN configuration,
Delete to remove a VLAN configuration.
Figure 5-141 Profile Overrides - Add Network Bridge VLAN screen
Edit to modify or override an existing Bridge VLAN
Description (up to 64 characters) unique to the VLAN's specific
VLAN ID between 1 -