Radio Override Configuration - Motorola WiNG 5 System Reference Manual

5 - 204 WiNG 5 Access Point System Reference Guide

5.10.1.3 Radio Override Configuration


Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no longer relevant to
the access point's deployment objective.
To define a radio configuration override for an access point:
1. Select Devices
2. Select a target access point from the Device Browser in the lower, left-hand, side of the UI.
3. Select Profile Overrides
4. Select Interface
5. Select Radios.
6. Review the following radio configuration data to determine whether a radio configuration requires modification
or override:
Name
from the Configuration tab.
from the Device menu to expand it into sub menu options.
to expand its sub menu options.
Figure 5-114 Profile Overrides - Access Point Radios screen
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
Displays whether the reporting radio is the access point's radio1, radio2 or
radio3. AP-7131 models can support up to 3 radios. AP-6532 and AP-7161
models support 2 radios and AP-6511 and AP-6521 models support a single
radio.