Motorola WiNG 5 System Reference Manual page 326

5 - 266 WiNG 5 Access Point System Reference Guide
7. If adding a new NAT policy or editing the configuration of an existing policy, define the following parameters:
Name
IP Address Range
Select the
8. Select OK
to the last saved configuration.
9. Select the
The Source
Figure 5-148 NAT Pool screen
If adding a new NAT policy, provide a name to help distinguish it from others
with similar configurations. The length cannot exceed 64 characters.
Define a range of IP addresses hidden from the public Internet. NAT modifies
network address information in the defined IP range while in transit across a
traffic routing device. NAT only provides IP address translation and does not
provide a firewall. A branch deployment with NAT by itself will not block
traffic from being potentially routed through a NAT device. Consequently,
NAT should be deployed with a stateful firewall.
+ Add Row button as needed to append additional rows to the IP Address Range table.
to save the changes or overrides made to the profile's NAT Pool configuration. Select
Static NAT tab.
tab displays by default.
Reset to revert