Motorola WiNG 5 System Reference Manual page 286

5 - 226 WiNG 5 Access Point System Reference Guide
Pseudowire ID
Traffic Source Type
Traffic Source Value
Native VLAN
17. Select OK
last saved configuration.
18. Select the
After a successful tunnel connection and establishment, individual sessions can be created. Each session is a
single data stream. After successful session establishment, data corresponding to that session (pseudowire) can
be transferred. If a session is down, the pseudowire associated with it is shut down as well.
Define a psuedowire ID for this session. A pseudowire is an emulation of a
layer 2 point-to-point connection over a packet-switching network (PSN). A
pseudowire was developed out of the necessity to encapsulate and tunnel
layer 2 protocols across a layer 3 network.
Lists the type of traffic tunnelled in this session.
Define a VLAN range to include in the tunnel session. Available VLAN ranges
are from 1 - 4,094.
Select this option to provide a VLAN ID that will not be tagged in tunnel
establishment and packet transfer.
to save the changes and overrides to the T2TP Tunnel screen. Select
Manual Session tab.
Reset to revert the screen to its