Motorola WiNG 5 System Reference Manual page 234

5 - 174 WiNG 5 Access Point System Reference Guide
Key Size
6. Select OK
7. To optionally import a CA certificate, select the
8. Define the following configuration parameters required for the Import of the RSA key:
Key Name
Key Passphrase
URL
Protocol
Port
IP Address
Use the spinner control to set the size of the key (between 1,024 - 2,048 bits).
Motorola Solutions recommends leaving this value at the default setting of
1024 to ensure optimum functionality.
to generate the RSA key. Select
Figure 5-100 Certificate Management - Import New RSA Key screen
Enter the 32 character maximum name assigned to the RSA key.
Define the key used by both the access point and the server (or repository) of
the target RSA key. Select the Show textbox to expose the actual characters
used in the passphrase. Leaving the Show checkbox unselected displays the
passphrase as a series of asterisks "*".
Provide the complete URL to the location of the RSA key.
If selecting Advanced, select the protocol used for importing the target key.
Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
If selecting Advanced, use the spinner control to set the port. This option is not
valid for cf, usb1 and usb2.
If selecting Advanced, enter IP address of the server used to import the RSA
key. This option is not valid for cf, usb1 and usb2.
Cancel to revert the screen to its last saved configuration.
Import button from the RSA Keys screen.