Motorola WiNG 5 System Reference Manual page 572

12 - 8 WiNG 5 Access Point System Reference Guide
Protocol
Port
IP Address
Hostname
Path/File
User Name
Password
Target
3. Select Copy
If Advanced is selected, choose the protocol for file management.
Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
This parameter is required only when Server is selected as the
and Advanced is selected.
If Advanced is selected, specify the port for transferring files. This option
is not available for cf, usb1, and usb2. Enter the port number directly or use
the spinner control.
This parameter is required only when Server is selected as the Source.
If Advanced is selected, specify the IP address of the server used to
transfer files. This option is not valid for cf, usb1, and usb2. If IP address
of the server is provided, a
This parameter is required only when Server is selected as the Source.
If needed, specify a Hostname of the server transferring the file. This
option is not valid for cf, usb1, and usb2. If a hostname is provided, an
Address
This field is only available when Server is selected in the
If Advanced is selected, define the path to the file on the server. Enter the
complete relative path to the file.
This parameter is required only when Server is selected as the Source.
If Advanced is selected, provide a user name to access a FTP or SFTP
server.
This parameter is required only when Server is selected as the Source,
and the selected protocol is ftp or sftp.
If Advanced is selected, provide a password to access the FTP or SFTP
server.
This parameter is required only when Server is selected as the Source,
and the selected protocol is ftp or sftp.
If Advanced is selected, set the target destination to transfer the file using
FTP or SFTP.
• Select Server if the destination is a remote server, then provide a URL
to the location of the server resource or select
the same network address information described above.
• Select Access Point if the destination is an access point.
to begin the file transfer. Selecting
Hostname
is not needed.
Reset reverts the screen to its last saved configuration.
Source
is not required.
From field.
Advanced and provide
IP