Table of Contents
Advertisement
9. Refer to the
Route Redistribution
Select the
+ Add Row
button to populate the table. Set the
include connected, kernal and static.
Select the
Metric Type
Metric
option to define route metric used with the redistributed route.
10. Use the
OSPF Network
Select the
+ Add Row
button to populate the table. Add the IP address and mask of the
OSPF. Additionally, define the OSPF area (IP address) to which the network belongs.
11. Set an OSPF Default Route Priority (1 - 8,000) as the priority of the default route learnt from OSPF.
12. Select the
Area Settings
An OSPF Area contains a set of routers exchanging Link State Advertisements (LSAs) with others in the same area.
Areas limit LSAs and encourage aggregate routes.
13. Review existing
Area Settings
Area ID
Authentication Type
Type
14. Select
Add
to create a new OSPF configuration,
configuration.
table to set the types of routes that can be used by OSPF.
option to define the exterior metric type (1 or 2) used with the route redistribution. Select the
table to define networks (IP addresses) to connect using dynamic routes.
tab.
Figure 5-133 OSPF Area Settings screen
configurations using:
Displays either the IP address or integer representing the OSPF area.
Lists the authentication schemes used to validate the credentials of dynamic
route connections.
Lists the OSPF area type in each listed configuration.
Edit
Route Type
used to define the redistributed route. Options
to modify an existing configuration or
Device Configuration 5 - 243
Network(s)
participating in
Delete
to remove a
Hide quick links:
Advertisement
Table of Contents
