Table of Contents
Advertisement
9 - 22 WiNG 5 Access Point System Reference Guide
Boot File
BOOTP Next Server
Client Name
Enable Unicast
11.Define the following
NetBIOS Node Type
NetBIOS Servers
12.Refer to the
assignment of static IP addresses without creating numerous host pools with manual bindings. This eliminates
the need for a long configuration file and reduces the space required in NVRAM to maintain address pools. Select
the
+ Add Row
available.
13.Scroll down to the
to all clients, whereas a set of subnet options applies only to the clients on a specified subnet. If you configure
the same option in more than one set of options, the precedence of the option type decides which the DHCP server
supports a client.
a. Select the
differentiate it from others with similar configurations. At any time you can select the radio button of an
existing option and select the
b. Assign a
only applies to the vendor class for which it is defined.
14.Within the
to 8 IP addresses can be provided and translated.
Enter the name of the boot file used with this pool. Boot files (Boot
Protocol) can be used to boot remote systems over the network. BOOTP
messages are encapsulated inside UDP messages so requests and replies
can be forwarded. Each DHCP network pool can use a different file as
needed
Provide the numerical IP address of the server providing BOOTP resources.
Provide the name of the client requesting DHCP Server support.
Unicast packets are sent from one location to another location (there's just
one sender, and one receiver). Select this option to forward unicast
messages to just a single device within this network pool.
NetBIOS
parameters required to complete the creation of the static binding configuration:
Set the NetBios Node Type used with this particular pool. The node can
have one of the following types:
Broadcast - Uses broadcasting to query nodes on the network for the
owner of a NetBIOS name.
Peer-to-Peer - Uses directed calls to communicate with a known NetBIOS
name server (such as a WINS server), for the IP address of a NetBIOS
machine.
Mixed - A mixed node using broadcasted queries to find a node, and failing
that, queries a known p-node name server for the address.
Hybrid - A combination of two or more nodes.
Undefined - No node type is applied.
Specify a numerical IP address of a single or group of NetBIOS WINS
servers available to DHCP supported wireless clients. A maximum of 8
server IP addresses can be assigned.
Static Routes Installed on Clients
button to add individual destinations. Select the
DHCP Option Values
+ Add Row
button to add individual options. Assign each a
- Delete
Value
to each option with codes in the range of 1 through 254. A vendor specific option definition
Network
field, define one or group of
field to set
Destination
Delete
table to set Global DHCP options. A set of global DHCP options applies
button to remove it from the list of those available.
DNS Servers
to translate domain names to IP addresses. Up
IP and
Gateway
addresses enabling
icon to remove it from the list of those
Global DHCP Option Name
to help
Hide quick links:
Advertisement
Table of Contents
