Table of Contents
Advertisement
19.If adding a new WIPS signature, define a
cannot exceed 64 characters.
20.Set the following network address information for a new or modified WIPS Signature:
Enable Signature
BSSID MAC
Source MAC
Destination MAC
Frame Type to Match
Match on SSID
SSID Length
21.Refer to
Thresholds
field to set the thresholds used as filtering criteria.
Client Threshold
Figure 8-13 WIPS Signature Configuration screen
Name
to distinguish it from others with similar configurations. The name
Select the radio button to enable the WIPS signature for use with the
profile. The default signature is enabled.
Define a BSS ID MAC address used for matching purposes.
Define a source MAC address for the packet examined for matching
purposes.
Set a destination MAC address for a packet examined for matching
purposes.
Use the drop-down menu to select a frame type for matching with the
WIPS signature.
Sets the SSID used for matching. Ensure it's specified properly or the SSID
won't be properly filtered.
Set the character length of the SSID used for matching purposes. The
maximum length is 32 characters.
Specify the threshold limit per client that, when exceeded, signals the
event. The configurable range is from 1 - 65,535.
Security Configuration 8 - 27
Hide quick links:
Advertisement
Table of Contents
