Motorola WiNG 5 System Reference Manual page 184

5 - 124 WiNG 5 Access Point System Reference Guide
5. Review the following Bridge NAT configurations to determine whether a new Bridge NAT configuration requires
creation or an existing configuration modified or removed.
ACL
Interface
NAT Pool
Overload IP
Overload Type
6. Select Add
remove a configuration.
Figure 5-68 Security Bridge NAT screen
Lists the ACL applying IP address access/deny permission rules to the
Bridge NAT configuration.
Lists the communication medium (outgoing layer 3 interface) between
source and destination points. This is either the access point's pppoe1 or
wwan1 interface or the VLAN used as the redirection interface between
the source and destination.
Lists the names of existing NAT pools used with the Bridge NAT
configuration. This displays only when Overload Type is NAT Pool.
Lists the address used globally for numerous local addresses.
Lists the overload type used with the listed IP ACL rule. Set as either NAT
Pool, One Global Address or Interface IP Address.
to create a new Bridge VLAN configuration, Edit to modify an existing configuration or Delete to