Table of Contents
Advertisement
1-10
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
For detailed information on configuring the access point's WAN port, see
Configuring WAN Settings
on page
5-16.
The LAN and WAN port MAC addresses can be located within the LAN and WAN Stats screens.
For detailed information on locating the access point's MAC addresses, see
Viewing WAN Statistics
on page 7-2
and
Viewing LAN Statistics on page
7-6. For information on access point MAC address
assignments, see
MAC Address Assignment on page
1-29.
1.2.6 Multiple Mounting Options
The access point attaches to a wall, mounts under a ceiling or above a ceiling (attic). Choose a
mounting option based on the physical environment of the coverage area. Do not mount the access
point in a location that has not been approved in a radio coverage site survey.
For detailed information on the mounting options available , see
Mounting an AP-7131N-FGR on page
2-10.
1.2.7 Antenna Support for 2.4 GHz and 5 GHz Radios
The access point supports several 802.11a/n and 802.11b/g/n radio antennas. Select the antenna
best suited to the radio transmission requirements of your coverage area.
1.2.8 Sixteen Configurable WLANs
A Wireless Local Area Network (WLAN) is a data-communications system that flexibly extends the
functionalities of a wired LAN. A WLAN does not require lining up devices for line-of-sight
transmission, and are thus, desirable for wireless networking. Roaming users can be handed off from
one access point to another like a cellular phone system. WLANs can therefore be configured around
the needs of specific groups of users, even when they are not in physical proximity. Sixteen WLANs
are configurable on each access point.
To enable and configure WLANs on an access point radio, see
Click Undo Changes (if necessary) to
undo any changes made. Undo Changes reverts the settings displayed on the screen to the last saved
configuration. on page
5-26.
1.2.9 Support for 4 BSSIDs per Radio
The access point supports four BSSIDs per radio. Each BSSID has a corresponding MAC address. The
first MAC address corresponds to BSSID #1. The MAC addresses for the other three BSSIDs (BSSIDs
#2, #3, #4) are derived by adding 1, 2, 3, respectively, to the radio MAC address.
Advertisement
Table of Contents
