Table of Contents
Advertisement
5 - 22 WiNG 5 Access Point System Reference Guide
VLAN
IP Address
Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new interface
requires creation, or an existing Virtual Interface requires edit or deletion.
5. Select
Add
Interface or
The
Basic Configuration
created or an existing one is being modified.
6. If creating a new Virtual Interface, use the
7. Define the following parameters from within the
Description
Admin Status
Displays the numerical VLAN ID associated with each listed interface.
Defines whether DHCP was used to obtain the primary IP address used by the
Virtual Interface configuration.
to define a new Virtual Interface configuration,
Delete
to permanently remove a selected Virtual Interface.
Figure 5-10 Virtual Interfaces - Basic Configuration screen
screen displays by default regardless of a whether a new Virtual Interface is being
Provide or edit a description (up to 64 characters) for the Virtual Interface that
helps differentiate it from others with similar configurations.
Either select the Disabled or Enabled radio button to define this interface's
current status within the network. When set to Enabled, the Virtual Interface
is operational and available. The default value is disabled.
Edit
to modify the configuration of an existing Virtual
Name
spinner control to define a numeric ID between 1 - 4094.
Properties
field:
Hide quick links:
Advertisement
Table of Contents
