Motorola WiNG 5 System Reference Manual page 298

5 - 238 WiNG 5 Access Point System Reference Guide
6. Select this option to enable IP routing using static routes provided in the route table. This option is enabled by
default.
7. Select Add Row +
8. Add IP addresses and network masks in the
9. Provide the
10. Refer to the Default Route Priority field and set the following parameters:
Static Default Route
Priority
Figure 5-131 Network Routing screen
as needed to include single rows with in the static IPv4 route table.
Gateway used to route traffic.
Use the spinner control to set the priority value (1 - 8,000) for the default
static route. The default setting is 100.
Network column.