Table of Contents
Advertisement
9. Define or override the following
MLCP IP
MLCP VLAN
10. Select
OK
to save the changes and overrides made to the Settings tab. Select
configuration.
11. Select the
IP
tab to display the link IP network address information shared by the devices managed by the MINT
configuration.
The IP tab displays the IP address, Routing Level, Listening Link, Port, Forced Link, Link Cost, Hello Packet Interval and
Adjacency Hold Time managed devices use to securely communicate amongst one another.
Select
Add
to create a new Link IP configuration or
MINT Link
Settings:
Check this box to enable MINT Link Creation Protocol (MLCP) by IP Address.
MINT Link Creation Protocol is used to create one UDP/IP link from the
device to a neighbor. That neighboring device can be another AP.
Check this box to enable MLCP by VLAN. MLCP is used to create one VLAN
link from the device to a neighbor. That neighboring device can be another
AP.
Figure 5-159 Advanced Profile MINT screen - IP tab
Edit
Device Configuration 5 - 281
Reset
to override an existing MINT configuration.
to revert to the last saved
Hide quick links:
Advertisement
Table of Contents
