Fault Management - Motorola WiNG 5 System Reference Manual

11 - 2 WiNG 5 Access Point System Reference Guide

11.1 Fault Management

Fault management enables user's administering multiple sites to assess device performance and issues effecting the
network. Use the Fault Management screens to view and administrate errors generated by an access point or a
connected wireless client.
To conduct Fault Management on an access point:
1. Select Diagnostics
The Filter Events
By default, all events are enabled, and an administrator has to turn off events if they don't require tracking.
Use the Filter Events
module received, source MAC of the event, device MAC of the event and MAC address of the wireless client.
2. Define the following
Severity
> Fault Management.
screen displays by default. Use this screen to configure how events are tracked and managed.
Figure 11-1 Fault Management Filter Events screen
screen to create filters for managing events. Events can be filtered based on severity,
Customize Event Filters:
Set the severity of the event being filtered. Select from the following:
All Severities – All events are displayed irrespective of their severity
Critical – Only critical events are displayed
Error – Only errors are displayed
Warning – Only warnings are displayed
Informational – Only informational events are displayed