Table of Contents
Advertisement
12 - 30 WiNG 5 Access Point System Reference Guide
IP Address
Hostname
Path
7. Select
OK
8. To optionally export a RSA key to a remote location, select the
9. Export the key to a redundant RADIUS server so it can be imported without generating a second key. If there's
more than one RADIUS authentication server, export the certificate and don't generate a second key unless you
want to deploy two root certificates.
10.Define the following configuration parameters required for the Export of the RSA key:
Key Name
Key Passphrase
URL
Enter IP address of the server used to import the RSA key. This option is not
valid for cf, usb1 and usb2.
Provide the hostname of the server used to import the RSA key. This option is
not valid for cf, usb1 and usb2.
Specify the path to the RSA key. Enter the complete relative path to the key on
the server.
to import the defined RSA key. Select
Figure 12-19 Export RSA Key screen
Enter the 32 character maximum name assigned to the RSA key.
Define the key passphrase used by the server. Select the Show textbox to
expose the actual characters used in the passphrase. Leaving the checkbox
unselected displays the passphrase as a series of asterisks "*".
Provide the complete URL to the location of the key. If needed, select Advanced
to expand the dialog to display network address information to the location of
the target key. The number of additional fields that populate the screen is also
dependent on the selected protocol.
Cancel
to revert the screen to its last saved configuration.
Export
button from the RSA Keys screen.
Hide quick links:
Advertisement
Table of Contents
