Table of Contents
Advertisement
7 - 4
WiNG 5 Access Point System Reference Guide
3. If creating a new PBR policy assign it a
configuration from others with similar attributes. Select
route map configurations can be added, modified or removed.
4. Refer to the following to determine whether a new route-map configuration requires creation or an existing
route-map requires modification or removal:
Precedence
DSCP
Role Policy
User Role
Access Control List
WLAN
Policy Name
Figure 7-2 Policy Based Routing screen - Route Maps tab
Lists the numeric precedence (priority) assigned to each listed PBR
configuration. A route-map consists of multiple entries, each carrying a
precedence value. An incoming packet is matched against the route-map
with the highest precedence (lowest numerical value).
Displays each policy's DSCP value used as matching criteria for the route
map. DSCP is the Differentiated Services Code Point field in an IP header
and is for packet classification. Packet filtering can be done based on
traffic class, determined from the IP DSCP field. One DSCP value can be
configured per route map entry.
Lists each policy's role policy used as matching criteria.
Lists each policy's user role used as matching criteria.
Displays each policy's IP ACL used as an access/deny filter criteria for the
route map.
Displays each policy's WLAN used as an access/deny filter for the route
map.
up to 32 characters in length to distinguish this route map
Continue
to proceed to the Policy Name screen where
Hide quick links:
Advertisement
Table of Contents
