Motorola WiNG 5 System Reference Manual page 139

26. Use the Inbound IP Firewall Rules
dynamic route.
Either select an existing IP firewall policy or use the default set of IP firewall rules. The firewall inspects OSPF route
traffic flows and detects potential attacks on the dynamic route not visible to traditional wired firewall appliances.
Select the Create icon to define a new set of IP firewall rules that can be applied to the OSPF route configuration.
Selecting Edit allows for the modification of an existing IP firewall rules configuration. For more information, see
Wireless Firewall on page
27. Select OK to save the changes to the OSPF route security configuration. Select
configuration.
28. Select the Dynamic_Routing
Figure 5-40 OSPF Virtual Interface - Security screen
drop-down menu to select the IP access and deny rules to apply to the OSPF
8-2.
tab.
Device Configuration 5 - 79
Reset to revert to the last saved