Table of Contents
Advertisement
6. Set the following MSTP Configuration parameters:
MSTP Enable
Max Hop Count
MST Config Name
MST Revision Level
Cisco MSTP
Interoperability
Figure 5-130 Spanning Tree screen
Select this option to enable MSTP for this profile. MSTP is disabled by
default, so if requiring different (groups) of VLANs with the profile supported
network segment.
Define the maximum number of hops the BPDU will consider valid in the
spanning tree topology. The available range is from 7 -127. The default
setting is 20.
Define a 64 character maximum name for the MST region as an identifier.
Set a numeric revision value ID for MST configuration information. Set a
value from 0 - 255. The default setting is 0.
Select either the Enable or Disable radio buttons to enable/disable
interoperability with Cisco's version of MSTP, which is incompatible with
standard MSTP. This setting is disabled by default.
Device Configuration 5 - 235
Hide quick links:
Advertisement
Table of Contents
