Table of Contents
Advertisement
16. Use the Mesh screen to define how mesh connections are established and the number of links available amongst
access points within the Mesh network.
17. Define the following
Mesh Settings:
Mesh
Mesh Links
18. Refer to the
Preferred Peer Devices
devices for preferred mesh connection. Use the Priority spinner control to set a priority (1 -6) for connection preference.
19. Select the
OK
button located at the bottom right of the screen to save the changes to the Mesh configuration. Select
Reset
to revert to the last saved configuration.
20. Select the
Advanced Settings
Figure 5-19 Access Point Radio - Mesh tab
Options include Client, Portal and Disabled. Select Client to scan for mesh
portals, or nodes that have connection to portals, and then connect through
them. Portal operation begins beaconing immediately and accepts connections
from other mesh supported nodes. Select Portal when setting a mesh
connection between two Standalone APs. The default value is Disabled.
Use the spinner control to define the number of mesh links (1 -6) an access
point radio will attempt to create. The default settings is 3 links.
table and select
+ Add Row
tab.
Device Configuration 5 - 39
to define MAC addresses representing peer
Hide quick links:
Advertisement
Table of Contents
