Table of Contents
Advertisement
5 - 190 WiNG 5 Access Point System Reference Guide
7. Define a 64 character maximum
The Preferred group is the Virtual Controller group the access point would prefer to connect upon adoption.
8. Use the spinner control to set the
This is the VLAN the Virtual Controller is reachable on. Select between 1 - 4094. There is no default value for this
setting.
9. Use the
+ Add Row
parameters for defining the preferred Virtual Controller adoption resource.
Host
Pool
Routing Level
10. Select
OK
revert to the last saved configuration
Figure 5-107 Profile Overrides - Adoption screen
Preferred
Controller
button to populate the Controller Hostnames table with the following host, pool and routing
Use the drop down menu to either define a numerical IP address or hostname
of a Virtual Controller resource.
Use the spinner control to define the pool the Virtual Controller belong to. The
default setting is pool 1.
Use the spinner control to define the pool the Virtual Controller belong to. The
default setting is pool 1.
to save the changes and overrides made to the access point adoption configuration. Select
Group.
VLAN.
Reset
to
Hide quick links:
Advertisement
Table of Contents
