Motorola WiNG 5 System Reference Manual page 225

3. To optionally import a certificate, select the
Trustpoint screen displays.
Figure 5-93 Certificate Management - Import New Trustpoint screen
4. Define the following configuration parameters required for the Import of the trustpoint.
Trustpoint Name
Key Passphrase
URL
Protocol
Port
IP Address
Import button from the Certificate Management screen. The
Enter the 32 character maximum name assigned to the target trustpoint. The
trustpoint signing the certificate can be a certificate authority, corporation or
individual.
Define the key used by both the device and the server (or repository) of the
target trustpoint. Select the Show textbox to expose the actual characters
used in the key. Leaving the Show checkbox unselected displays the
passphrase as a series of asterisks "*".
Provide the complete URL to the location of the trustpoint.
If selecting Advanced, define, the protocol used for importing the target
trustpoint. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
If selecting Advanced, use the spinner control to set the port. This option is not
valid for cf, usb1 and usb2.
If selecting Advanced, enter IP address of the server used to import the
trustpoint. This option is not valid for cf, usb1 and usb2.
Device Configuration 5 - 165
Import New