Table of Contents
Advertisement
13 - 56 WiNG 5 Access Point System Reference Guide
13.3.8 Policy Based Routing
Access Point Statistics
The Policy Based Routing statistics screen displays statistics for selective path packet redirection. PBR can optionally
mark traffic for preferential services (QoS). PBR is applied to incoming routed packets, and a route-map is created
containing a set of filters and associated actions. Based on the actions defined in the route-map, packets are
forwarded to the next relevant hop. Route-maps are configurable under a global policy called routing-policy, and
applied to profiles and devices.
To review a selected access point's PBR statistics:
1. Select the
2. Select
System
an access point for statistical observation.
3. Select
Policy Based
4. The Access Point
Precedence
Primary Next
Hop IP
Primary Next
Hop State
Statistics
menu from the Web UI.
from the navigation pane (on the left-hand side of the screen), expand the default node and select
Routing.
Figure 13-31 Access Point - Policy Based Routing screen
Policy Based Routing
Lists the numeric precedence (priority) assigned to each listed PBR
configuration. A route-map consists of multiple entries, each carrying a
precedence value. An incoming packet is matched against the route-map with
the highest precedence (lowest numerical value).
Lists the IP address of the virtual resource that, if available, is used with no
additional route considerations.
Displays whether the primary hop is being applied to incoming routed
packets.
screen displays the following:
Hide quick links:
Advertisement
Table of Contents
