Table of Contents
Advertisement
Blacklist Duration
15.Set a
Firewall Session Hold Time
user credentials and Firewall state information when a client roams. The default setting is 30 seconds.
16.Select
OK
when completed to update this WLAN's Firewall settings. Select
saved configuration.
WLAN Firewall Deployment Considerations
Before defining an access control configuration on a WLAN, refer to the following deployment guidelines to ensure the
configuration is optimally effective:
• IP and non-IP traffic on the same Layer 2 interface can be filtered by applying both an IP ACL and a MAC ACL to the
interface.
6.1.4 Configuring Client Settings
Wireless LANs
Each WLAN can maintain its own client setting configuration. These settings include wireless client inactivity timeouts
and broadcast configurations. An AP-7131, AP-6532 or AP-7161 model access point can support up to 256 clients per
access point. An AP-6511 or AP-6521 model can support up to 128 clients per access point. Thus, client load balancing
can be enforced for the WLAN as more and more WLANs are deployed.
1. Select
Configuration
to the wireless network.
2. Select the
Add
button to create a new WLAN, or select and existing WLAN and
existing WLAN.
3. Select the
Client Settings
Select the checkbox and define a setting between 0 - 86,400 seconds.
Once the blacklist duration has been exceeded, offending clients can
reauthenticate.
in either Seconds (1 - 300) or Minutes (1 - 5). This is the hold time for caching
>
Wireless
>
Wireless LANs
tab.
Wireless Configuration 6 - 33
Reset
to revert the screen back to its last
to display a high-level display of the existing WLANs available
Edit
to modify the properties of an
Hide quick links:
Advertisement
Table of Contents
