Motorola WiNG 5 System Reference Manual page 185

7. Select the ACL whose IP rules are to be applied to this policy based forwarding rule. A new ACL can be defined by
selecting the Create icon, or an existing set of IP ACL rules can be modified by selecting the Edit icon.
8. Use the IP Address Range
Interface
NAT Pool
Overload IP
Overload Type
9. Select + Add Row to set the IP address range settings for the Bridge NAT configuration.
Figure 5-69 Security Source Dynamic NAT screen
table to configure IP addresses and address ranges that can used to access the Internet.
Lists the outgoing layer 3 interface on which traffic is re-directed. The
interface can be an access point WWAN or PPPoE interface. Traffic can
also be redirected to a designated VLAN.
Displays the NAT pool used by this Bridge NAT entry. A value is only
displayed only when Overload Type has been set to NAT Pool.
Lists whether the single global address supporting numerous local
addresses.
Displays the override type for this policy based forwarding rule.
Device Configuration 5 - 125